Using Your Oven
Continued
LockingOFF screw
OFF
To |
| JTo raise |
Tooth ’ | \ | Notches |
Adjusting the oven temperature controls
Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without you noticing the change. Your new oven is properly adjusted to provide accurate temperatures. But, when compared to your old oven, the new design may give you different results.
If, after using the oven for a period of time, you are not satisfied with the temperature settings, they can be adjusted by following these steps:
1.For the oven you want to adjust, pull the Oven Temperature Control Knob straight off.
2.Loosen the locking screw. Note the positions of the notches.
3.To lower the temperature, move the tooth a notch closer to LO. Each notch equals about 10°F (5°C).
4.To raise the temperature, move the tooth a notch closer to HI. Each notch equals about 10°F (5°C).
Tighten the locking screw and replace the control knob.
14