Whirlpool ED20DFXEB00 warranty Connecting to refrigerator

Page 10

INSTALLING YOUR REFRIGERATOR

Connecting to refrigerator

1.While your refrigerator is away from the wall, remove and save the lower cover by removing the screws.

2.Remove the nut and sleeve from the adapter fitting and slide the brass nut and sleeve over the end of the copper tubing. Insert the copper tubing com- pletely into the adapter fitting and make sure that the hose washer is in place. Tighten the adapter fitting by hand as much as possible, then tighten 1/2 turn with an adjustable wrench. Make sure the copper tubing is secure by pulling on it gently.

3.Turn shut-off valve ON. CHECK FOR LEAKS. TIGHTEN ANY CONNECTIONS (INCLUDING CONNECTIONS AT THE VALVE) OR NUTS THAT LEAK.

4.Replace the lower back cover onto the refrigerator and replace and tighten the screws. Be sure to tuck wires inside the cover. Do not allow wires to be pinched.

5.Create a service loop with the copper tubing to avoid kinks and secure it to the refrigerator cabinet using the “P” clamp.

6.Plug in the refrigerator and recheck for leaks while it is running. Make sure that the water inlet tube in the freezer section stays firmly in place.

7.Reposition the refrigerator against the wall.

10

Image 10

Contents UseAndCare Part no /12100701STable of Contents Your refrigerator, follow these basic precautions Refrigerator SafetyHelp us help you Control Panel Parts and FeaturesFreezer control Refrigerator control Removing packaging materials Installing Your RefrigeratorCleaning your refrigerator To remove any remaining tape or label glueRemoving the wooden base Plugging itLeveling it Removing the doors and handles Aligning the doorsCold water supply Attaching the ice maker to a water supplyTools required Connecting to water line Controls water supplyConnecting to refrigerator Setting the controls Using Your RefrigeratorChanging the control settings Adjusting the door bins Removing the snap-on door trivetTo replace a shelf Adjusting the cantilever refrigerator shelvesTo remove a shelf To slide shelf outTo remove the meat drawer Removing the temperature controlled meat drawer and coverAdjusting the meat drawer temperature To remove the coverAdjusting the crisper humidity control Removing the crispers and crisper coversRemoving the freezer basket Using the utility compartmentRemoving the freezer shelf Using the ice and water dispensing system To dispense iceWater dispenser Solving common ice and water dispenser problemsProblem Possible CAUSE/SOLUTION Dispenser lightUsing the automatic ice maker Solving common ice maker problemsTo remove ice bin Removing the ice maker storage binRemoving the base grille To remove the grilleChanging the light bulbs To change the freezer lightUnderstanding the sounds you may hear Saving energyPart What to USE HOW to Clean Caring for Your RefrigeratorLong vacations Vacation and moving careMoving Power interruptions Questions?Food Storage Guide Storing fresh foodFreezing Storing frozen foodPackaging Packaging recommended for useProblem Check the Following TroubleshootingBefore calling for assistance … Requesting Assistance or Service For assistance or servicePage Page Warranty Whirlpool Refrigerator Warranty