Installation Instructions

Unpack the IceMaker

WARNING

Excessive Weight Hazard

Use two or more people to move and install ice maker. Failure to do so can result in back or other injury.

Removing Packaging Materials

Remove tape and glue from your ice maker before using.

■The ice maker must be installed in an area sheltered from the elements, such as wind, rain, water spray, or drip.

■When installing the ice maker under a counter, follow the recommended opening dimensions shown. Place electrical and plumbing fixtures in the recommended location as shown.

NOTES:

■Be sure the power supply cord is not pinched between the ice maker and the cabinet.

■Be sure the water supply line is not pinched between the ice maker and the cabinet.

■Be sure the drain line (on some models) is not pinched between the ice maker and the cabinet.

■To remove any remaining tape or glue from the exterior of the ice maker, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

■Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. Do not use chlorine bleach on the stainless steel surfaces of the ice maker. These products can damage the surface of your ice maker.

Cleaning Before Use

34"

(86.4 cm)

Min.

34¹⁄₂"

(87.6 cm)

Max.

11¹⁄₂" (29.2 cm)

3¹⁄₂" 9"

(8.9 cm)(22.9 cm)

28¹⁄₂"

(72.4 cm)

After you remove all of the packaging materials, clean the inside of your ice maker before using it. See the cleaning instructions in the “Ice Maker Care” section.

LocationRequirements

■To ensure proper ventilation for your ice maker, the front side must be completely unobstructed. The ice maker may be closed-in on the top and three sides, but the installation should allow the ice maker to be pulled forward for servicing if necessary.

■Installation of the ice maker requires a cold water supply inlet of ¹⁄₄" (6.35 mm) OD soft copper tubing with a shutoff valve and either a gravity-drain system or condensate pump to carry the water to an existing drain.

■Choose a well ventilated area with temperatures above 55°F (13°C) and below 110°F (43°C). Best results are obtained between 70°F (21°C) and 90°F (32°C).

24"

(60.1 cm)

15"

(38.1 cm)

A. Recommended location for electrical and plumbing fixtures

B. Floor level

■Choose a location where the floor is even. It is important for the ice maker to be level in order to work properly. If needed, you can adjust the height of the ice maker by changing the height of the leveling legs. See “Leveling.”

W10206421B specifications

The Whirlpool W10206421B is a versatile, high-quality refrigerator that seamlessly combines innovation with efficiency, making it an excellent choice for modern kitchens. One of the standout features of this appliance is its spacious interior, designed to offer ample storage for groceries and food items. The refrigerator is crafted with adjustable shelves, allowing users the flexibility to customize the space according to their needs. This adaptability is particularly beneficial for accommodating larger items, such as cakes or party platters.

In terms of cooling technology, the Whirlpool W10206421B employs a powerful refrigeration system that ensures consistent and optimal temperatures throughout its compartments. The refrigerator is equipped with a multi-airflow system, which circulates cool air evenly. This feature helps to preserve food freshness and prevents hot spots, ensuring that all items remain at an ideal temperature, thus reducing spoilage.

Energy efficiency is another hallmark of the W10206421B. It is designed with energy-saving features that not only help in reducing electricity bills but also minimize environmental impact. The Energy Star certification signifies that this refrigerator meets strict energy efficiency guidelines, making it a smart choice for eco-conscious consumers.

This model also boasts a sophisticated water filtration system, providing clean and tasty water and ice. The built-in water dispenser is convenient and user-friendly, ensuring you have access to fresh drinking water at all times. In addition, the ice maker feature ensures that you always have ice on hand without the need for ice trays.

Furthermore, the Whirlpool W10206421B comes with a sleek design that enhances its aesthetic appeal. The stainless steel finish adds a modern touch to any kitchen decor, while the easy-to-clean surfaces make maintenance a breeze.

Additional features include LED lighting, which illuminates the interior effectively, and door bins that provide extra storage options for smaller items. Overall, the Whirlpool W10206421B is designed with user convenience, energy efficiency, and food preservation in mind, making it a reliable appliance for families and individuals alike.