Whirlpool ED20AK Using your refrigerator, Setting the controls, Changing the control settings

Using your refrigerator

II

FREEZER CONTROL REFRIGERATOR CONTROL

Setting the controls...

Controls for the refrigerator and freezer are in the refrigerator. When the refrigerator is plugged in for

\\

EXTERIOR MOISTURE CONTROL LIGHT SWITCH

Give the refrigerator time to cool down com- pletely before adding food. (This may take sev- eral hours.)

These settings should be about right for nor- mal household refrigerator usage.

The controls will be set about right when milk or juice is as cold as you like when ice cream is firm.

2.set the FREEZE ,ONTROL to B

Changing the control settings...

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below.

l

l

l

Adjust the Refrigerator Control first.

Wait at least 24 hours between adjustments. Then adjust the Freezer Control if needed.

											RECOMMENDED
		CONDITION:		REASON:							CONTROL SETTINGS:
		If Refrigerator		Door	opened			often			Refrigerator
		Section	is	Large	amount			of food		added	Freezer
		TOO WARM		Room	temperature				too	warm
		If Freezer		Door	opened			often			Refrigerator
		Section	is	Large	amount			of food		added	Freezer
		TOO WARM		Very	cold		room		temperature
QUESTIONS?				[can’t	cycle			often enough]
..call	your	If Refrigerator		Controls		not		set	correctly		Refrigerator
COOL-LINE ’		Section	is	for your		conditions					Freezer
set-vice		TOO COLD
assistance		If ICE isn’t		Heavy		ice	usage				Refrigerator
telephone
		MADE	FAST ENOUGH	Very	cold		room		temperature		Freezer
number
				(can’t	cycle			often enough)
(page	161
		If BOTH SECTIONS		Door	opened			often			Refrigerator
		are TOO WARM		Large	amount			of food		added	Freezer
				Very warm or very cold
				room	temDeratures

3 C

4 B

Exterior Moisture Control

The Exterior Moisture Control on the Control Console operates electric heaters around the

door openings. These heaters help keep moisture from forming on the outside of the refrigerator.

1.Use the “OFF”setting when humidity is low.

2.Use the “ON” setting if moisture forms on the out- side of the refrigerator.