Whirlpool ED20AK Adjusting the refrigerator shelves, Removing the crisper, meat drawer and covers

Adjusting the refrigerator shelves...

Shelves can be adjusted to match the way you use your refrigerator.

To remove shelves:

1.Tilt up at front.

2.Lift up at back.

3.Pull shelf straight out.

To replace shelves:

I. Guide the rear hooks into the slots in the shelf supports.

2.Tilt up front of shelf until hooks drop into slot. Lower front of shelf to level position.

Removing the crisper, meat drawer and covers.. .

To remove the crisper and meat drawer:

1.Slide crisper and meat drawer straight out to the stop, lift drawer, then slide the rest of the way out.

2.Replace in reverse order.

PULL OUT TO THE STOP. LIFT THE FRONi

AND PULL AGAIN.

To remove		the	covers:							REMOVETHE
1. Push up		crisper		cover	glass	insert	from	bottom,
										GLASS INSERT,
	then slide out with both hands.									LlFl THEFRAME FRONT.
2.	Lift front	of cover		frame.					v!&	THENTHEBACK.	-~’
3.	Lift out cover		frame by		pulling	up	and	out.		GLASS IS HEAVY.
4.	Repeat	for meat		drawer	cover.
										BECAREFUL.
									*
To replace		the	covers:

I. Fit back of meat drawer cover in notch supports

on walls of refrigerator, then lower into place

2.Repeat for crisper cover frame.

3.Slide back of crisper cover glass Insert into place, then lower front.

Adjusting meat drawer temperature...

USE CONTROL TO ADJUST DRAWER TEMPERATURE

Cold air flows against the meat drawer through an opening between the freezer and the refrigera- tor. This helps keep the meat drawer colder than the rest of the refrigerator,

Slide the control to let more or less cold air through.

Removing freezer bin.. .

For proper air movement, keep the freezer brn in place when the refrigerator is operating.

To remove the bin:

1.Slide bin out to the stop.

2.Lift the front to clear the stop.

3.Slide out the rest of the way.

To replace the bin:

1.Place bin on the slides.

2.Make sure the stops clear the front of the slides.

3.Slide bin in