Whirlpool DU2000XS, DU2016XS manual Filtering system, Quiet operating tips, Water must be hot

Page 4

For Best Results

Your dishwasher cleans by spraying a mix- ture of hot. clean water and detergent against soiled surfaces of dishes. When a cycle is started, the dishwasher fills with waterto about the level of the heating element. This water is

pumped through the rotating spray arms, drained through the filter system which re-

moves food and soil, and pumped back through the rotating spray arms. Soiled water is pumped out and replaced with clean water during the cycle.

Load dishes so soiled surfaces face pow- erful spray from rotating arms.

self-cleaning filtering system and

removable pump guard help eliminate pre- rinsing by removing food particles from the

The filtering system

It Is not necessary to rinse dishes before puttlng them Into the dlshwasher. Just remove large pieces and quantities of food and bones. The filtering system helps keep food particles out of the wash water. Small particles are flushed away as water is pumped out. Larger particles are trapped in the pump guard.

To remove the pump guard for cleaning...

1.Wait at least 20 minutes after a cycle for the heating element to cool down.

2.Unload and remove the bottom rack.

3.Press the outside wall of the pump guard at the centerto release the latch.

4.Lift out and rinse clean.

To replace the pump guard...

1.Insert pump guard legs [on inside wall) into matching openings in filter screen.

2.Press down on outside wall until latch snaps into place.

3.Replace bottom rack with rack bumpers in front.

Water must be hot

For best cleaning and drying results, water should be at least 140°F (60°C).

1.Turn on hot water faucet nearest the dishwasher. Let water run until it is as hot as possible.

2.Hold a candy or meat thermometer in the stream of hot water to measure the temperature.

3.If the temperature is too low, have a qualified person raise the water heater thermostat setting.

Check Water

Temperature

Quiet operating tips

To avoid thumping and clattering noises during operation:

l Make sure lightweight load items are secured in the rack.

. Make sure pot lids and handles, pizza pans, cookie sheets, etc. do not touch interior walls

4

or interfere with either of the spray arms rotation.

l Load dishes so they don’t touch one another.

NOTE: Keep slnk draln plugs Inserted durlng dlshwasher operatlon to prevent noise tmnS- fer through dralns.

Image 4
Contents Dishwasher Contents Parts and features Model DU2000XS and DU2016XSQuiet operating tips Filtering systemWater must be hot Proper loading Top rack loadingBottom rack loading Silverware basket loadingDetergent dispenser Adding detergentHow much detergent to use Changing a setting Heat DRY cycleAIR DRY cycle Rinse & Hold cycleRinse & Hold Cycle Selecting a cycleTo add a dish after starting Energy saving tips Special tips on dishwasher use Dishwasher care & cleakgProblems CommonProblem Caused by Solution If you have a problem% If you need serviceIf you need assistance% Page TKirlpool