To change door panel color.
CAUTlON: Use care in changing panel. Cut metal edges may cause personal injury or damage to color panels.
Remove Iwo screws securing one of the side trim pieces, Slide trim down- ward until upper edge is free of console or end cap. Lift off trim piece.
PoeN~o 3367223 Reb 1
2.
Slide out color panels and corru-
gated spacer. Select panel you wish to
l-jaw3showing and place on $0~ of
panels. Slide color panels and spacer back into place.
Slide desired color panel into?he
lowa door trim and the groove on the underside of console. Gently push on panel surface to fit panel under side trim edge.
4 m
Slide trim piece against the console
or end cup. Align side trim and mount- ing holes in door frame. Secure trim to door with screws.
TKirlpuol
b CORPORATION
If the dishwasher is not operating properly.. .
Check these points:
mIs the door closed tightly and latched securely?
l Has the cycle been set correctly to start the dishwasher?
* Is the water turned on?
lHas a house fuse blown?
0 Has electrical power been interrupted?
Note: If the motor has stopped because of overload, it will automatically reset itself within a few minutes. If after checking these points the dishwasher still does not run or complete a cycle, contact the cashier at your local exchange for service information.
If you are
transferred to the United States, and...
your Whirlpool portable dishwasher requires service: Contact an authorized Whirlpool dealer or service technician and provide them with proof of the purchase date of your portable dishwasher. Service within the warranty period will be supplied at no charge.
If you have any questions about operating or maintaining your Whirlpool portable dishwasher that are not covered in the Insta!lation Instructions or Use and Care Guide, call the Whirlpool
Pmted In US A