Whirlpool I-43 manual Now start, Adapter +, Washer e% screen -.m Adapter, Panel B

Page 3

Now start...

Take two of the foam corners

from the carton and place them on the floor behind the dishwasher.

Stand on the right or left side of the dishwasher. Firmly grasp the body of the dishwasher and gently lay it on its back on the foam corners.

Remove the tape that holds the bottom pallet in place.

Numbers correspond to steps.

washer -sa

washer - es screen

adapter

If your faucet has internal threads, first install the washer and threaded

bushing, then the adapter screws onto the bushing.

For other type faucets, use the adapter kits specified:

-

Firmly push one caster into each of the holes at the corners of the dishwasher until they lock in place. Check casters, If casters are not locked into place, they may fall out when the dishwasher is moved or cause the dishwasher to vibrate during use.

adapter +

Faucets without threads - adapter kit, Part No. 3367946,

4.

Now stand the dishwasher back up.

5.

adapter-

-

F3

Check that all the parts are now installed. If there is an extra part, go back through the steps to see which

Use one of the faucet adapter kits that came with your Whirlpool portable dishwasher to modify the faucet where the machine will be used.

washer - e% screen -.m

adapter

Remove the screen holder or aerator from the end of the faucet.

For faucets with external threads, screw the adapter, Part No. 713750, directly onto the end of the faucet.

PANEL B

Faucets with Y&111/2external thread - adapter kit, Part No. 715676.

Note: If the washer will be used at a faucet equipped with a spray hose attachment, constant water pressure may affect the spray hose. To prevent potential problems, the spray hose should be permanently disconnected or replaced with a hlgh pressure hose.

6.

CHECK THEELECTRICALREQUIREMENTS TO BESUREYOU HAVETHECORRECT ELECTRICALSUPPLYAND RECOM- MENDEDGROUNDING METHOD.Check the installation instructions to see that

you have completed each step. If you have skipped a step, go back and complete that step before you continue with the following steps.

step was skipped.

8.

Check to make sure you have all your tools.

Take a few minutes to read the Use and Care Guide so you can get the best use from your new porfable dishwasher, Then move the dishwasher to the location where it will be used.

Image 3
Contents Pomable Dishwasher Panel a Tools needed for installation Parts sup liedLiterature package Faucet adapter kitsPanel B Now startAdapter + Washer e% screen -.m AdapterBleeder button InstallationFaucet Adapter Faucet Adapter w LockingPage Jaw3showing and place on $0~ If you are Transferred to the United States,