Whirlpool GDP8500 warranty When cycle is finished, Electrical connection, Converting to built-in

Page 19

When cycle is finished

1.Turn hot water off. (This can be done after the last rinse.)

2.Press the red button on the connector to release the water pressure

3.Lift slightly on the hose connector while pulling down the locking collar. Pull down on the connector

4.Empty any remaining water from the connector by turning the connector upsidedown.

5.Unplug power supply cord and return to storage compartment.

6.Return hoses to storage compartment.

Electrical connection

A power supply of 120 volts, 50160 Hz AC, 15 or 20 amps, is required. For your personal safety, this appliance must be grounded. This appliance is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock hazard it must be plugged into a mating 3-prong grounding type wall receptacle, grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle is not available, it is the responsibility and obligation of the customer to have a properly grounded 3-prong wall receptacle installed by a qualified electrician.

Sprang grounding

PQI

1

e

Power supply

Locking collar

Hose connection

Personal Injury Hazard

An extension cord should not be used with this appliance.

Such use may result in a fire, electrical shock or other personal injury.

Do not, under any circumstances, remove the power supply cord ground prong.

Converting to built-in

Your Whirlpool Portable Dishwasher can be converted to a built-in (undercounter) model by using conversion kit No. 4317856. The kit is available at your Whirlpool dealer or authorized Whirlpool@ service company. Instructions are included with the kit.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents UseAhdCare Thank you for buying a Whirlpool’ appliance Your safety is important to usReach IT Help us help youParts And Features Page This Using Your DishwasherBefore starting your dishwasher Starting your dishwasherClose the door. Do not latch It. Wait Canceling a cycleAdding a dish during a cycle CycleMain Cycle selection ChartWash Rinse Wash Rinse Dry 3inse Hash 3inse ?inse Dry Minutes What happens in each optionHi-Temp Wash option Air Dry OptionWhat type of detergent to use Using the detergent dispenserDetergent dispenser To check dispenser Using the rinse agent dispenserHow much detergent to use Rinse agent dispenserTo fill dispenser Quiet operating tipsTo check water temperature Water temperature tipsEnergy saving tips Special tips on dishwasher use This Section PagePage Loading Your DishwasherPreparing to load the dishwasher Loading the top rackDish load Loading the bottom rackMixed load Utensil loadTo open the basket Loading the silverware basketTo remove the basket To replace the basketBefore starting Connecting a Portable DishwasherWhile dishwasher is running Electrical connection When cycle is finishedConverting to built-in Caring for simulated wood top Cleaning the exteriorCleaning the interior Caring For Your DishwasherSolution chart Common Dishwashing ProblemsBlack or Gray Marks on Dishes Page Removing spots and film Before calling for assistance If You Need Assistance Or SewiceOn next If you need FSP replace- ment parts in the U.S.A If you need assistance or Service overseasIf you need service in the U.S.A If you need assistance in the U.S.APower Cleantm washing system parts covered by your warranty Lf you are not satisfied With how the problem was solvedWhirlpool Dishwasher Warranty
Top Page Image Contents