INSTALLATION
PRIOR TO CONNECTING
Check that the voltage on the rating plate corresponds to the voltage in your home.
Do not remove the microwave inlet protection plates located on the side of the oven cavity wall. They prevent grease & food particles from entering the microwave inlet channels.
Place the oven on a stable, even
surface that is strong enough to 
hold the oven and the food 
utensils you put in it. Use 
care when handling. 
Position the oven at a distance from other heating sources. The cooling air, which is taken in by the oven, must not exceed 35°C temperature. For sufficient ventilation there must be a space of at least
AFTER CONNECTING
The oven can be operated only if the oven door is firmly closed.
Poor television reception 
and radio interference may result if the oven is located close to a TV, radio or aerial.
Ensure that the appliance is not damaged. Check that the oven door closes firmly against the door support and that the internal door seal is not damaged. Empty the oven and clean the interior with a soft, damp cloth.
Do not operate this appliance if it has a damaged mains cord or plug, if it is not working properly, or if it has been damaged or dropped. Do not immerse the mains cord or plug in water. Keep the cord away from hot surfaces. Electrical shock, fire or other hazards may result.
The earthing of this appliance is compulsory. The manufacturer will accept no responsibility for injury to persons, animals or damage to objects arising from the
The manufacturers are not liable for any problems caused by the user’s failure to observe these instructions.
2