Whirlpool 2314473B warranty Style, Connect to Refrigerator

Page 5

6.Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the ¹⁄₄" (6.35 mm) drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws slowly and evenly so washer makes a watertight seal. Do not overtighten or you may crush the copper tubing.

7.Slip the compression sleeve and compression nut onto the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten.

8.Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.

Connect to Refrigerator

Style 1

1.Unplug refrigerator or disconnect power.

2.Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten.

3.Use the tube clamp on the back of the refrigerator to secure the tubing to the refrigerator as shown. This will help avoid damage to the tubing when the refrigerator is pushed back against the wall.

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any connections (including connections at the valve) or nuts that leak.

A

B

C

D

A. Tube clamp

C. Compression nut

B. Copper tubing

D. Valve inlet

6.The ice maker is equipped with a built-in water strainer. If your water conditions require a second water strainer, install it in the ¹⁄₄" (6.35 mm) water line at either tube connection. Obtain a water strainer from your nearest appliance dealer.

Style 2

1.Unplug refrigerator or disconnect power.

2.Remove and discard the black nylon plug from the gray water tube on the rear of the refrigerator.

3.If the gray water tube supplied with the refrigerator is not long enough, a ¹⁄₄" x ¹⁄₄" (6.35 mm x 6.35 mm) coupling is needed in order to connect the water tubing to an existing household water line. Thread the provided nut onto the coupling on the end of the copper tubing.

NOTE: Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

A

B

C

D

E F G

A. Refrigerator water tubing

 

E. Ferrule (purchased)

B. Nut (provided)

 

 

F. Nut (purchased)

C. Bulb

 

 

 

G.Household water line

D. Coupling (provided)

 

 

 

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

Style 3

1.Unplug refrigerator or disconnect power.

2.Remove and discard the black nylon plug from the gray water tube on the rear of the refrigerator.

3.Thread the provided nut onto the water valve as shown.

NOTE: Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

A

B

A.Bulb

B.Nut (provided)

4.Turn shutoff valve ON.

5.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

Complete the Installation

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Plug into a grounded 3 prong outlet.

2.Flush the water system. See “Water Dispenser.”

NOTE: Allow 24 hours to produce the first batch of ice. Discard the first three batches of ice produced. Allow 3 days to completely fill ice container.

5

Image 5
Contents Refrigerator USE & Care Guide AccessoriesBefore You Throw Away Your Old Refrigerator or Freezer Refrigerator SafetyClean Before Using Installation InstructionsUnpacktheRefrigerator LocationRequirementsWater Supply Requirements Electrical RequirementsConnecttheWater Supply Recommended Grounding MethodConnect to Refrigerator StyleRight-Hand Swing to Left-Hand Swing Refrigerator DoorsRemove Doors and Hinges Reverse Doors optionalFinal Steps Left-Hand Swing to Right-Hand SwingReplace Doors and Hinges Door Swing Reversal optional Using theControls AdjusttheDoorsCONDITION/REASON Adjustment Refrigerator USEWater Dispenser CrisperHumidityControlIceMaker WaterFiltrationSystem Cleaning TroubleshootingRefrigerator Care Changing theLightBulbsTemperature is too warm TemperatureandMoistureIceandWater Refrigerator seems noisyWater filter installed on the refrigerator? Remove filter Water filter installed on the refrigerator? Gray or darkAre there minerals such as sulfur in the water? a water Kink in the water source line? Straighten the water source15 mg/L † Product Data SheetsModel WF-NL120VChange the water filter every Application Guidelines/Water Supply ParametersModel WF-NLC120V Capacity 120 Gallons 454 Liters Items Whirlpool will not PAY for ONE Year Limited WarrantyDisclaimer of Implied Warranties Limitation of Remedies CallAccesorios Seguridad DEL RefrigeradorLimpiador de Acero Inoxidable Filtro de repuestoAntes de tirar su viejo refrigerador o congelador Instrucciones DE InstalaciónDesempaqueel refrigerador Requisitoseléctricos Requisitos deubicaciónRequisitosdelsuministro de agua Método de conexión a tierra recomendadoEstilo Conexióndelsuministro de aguaSuministro de agua de ósmosis inversa Abra la válvula de cierre Puertas del refrigeradorCómo terminar la instalación Masilla deApertura hacia la izquierda a apertura hacia la derecha Apertura hacia la derecha a apertura hacia la izquierdaCómo quitar las puertas y las bisagras Cambio del sentido de apertura de las puertas opcionalPasos finales Cómo volver a poner las puertas y las bisagras en su lugarCambio del sentido de apertura de las puertas opcional Usodelos controles AjustelaspuertasCONDICIÓN/MOTIVO Ajuste FábricadehieloDespachadordeagua Cómo quitar y volver a colocar la paleta del despachador Cómo despachar agua La luz del despachadorEl bloqueo del despachador Para bloquear el despachadorLimpieza SistemadefiltracióndeaguaCómocambiarlosfocos Para limpiar su refrigeradorFuncionamientodelrefrigerador Solución DE ProblemasEl refrigerador no funciona Parece que el motor funciona excesivamenteHieloyagua TemperaturayhumedadNota Es normal que se acumule un poco de humedad Nota Esto es una indicación de baja presión de aguaNota El agua del despachador se enfría solamente a 50F 10C El agua del despachador está tibiaPautas de aplicación/Parámetros para el suministro de agua Hoja DE Datos DEL ProductoModelo WF-NLC120V Capacidad de 120 galones 454 litros Garantía Limitada DE UN AÑO Whirlpool CorporationWhirlpool no Pagará POR LOS Siguientes Artículos Exclusión DE Garantías Implícitas Limitación DE RecursosAu Canada, commander la pièce N 31462B AccessoiresCommander la pièce N 4396701 L200V / NL120V / NLC120V Sécurité DU RéfrigérateurDéballageduréfrigérateur Instructions DinstallationAvant de jeter votre vieux réfrigérateur ou congélateur Enlever les portesMéthode recommandée de mise à la terre Exigences demplacementSpécifications électriques Spécifications del’alimentationen eauAlimentation en eau par osmose inverse Raccordementdelacanalisation deauPression de leau Raccordement à la canalisation d’eauPortes duréfrigérateur Achever l’installationOuverture vers la gauche à ouverture vers la droite Ouverture vers la droite à ouverture vers la gaucheDémontage Portes et charnières Inversion des portes facultatifÉtapes finales Réinstallation Portes et charnièresEnlever la vis à tête hexagonale de ⁵⁄₁₆ du rail central Inversion du sens douverture des portes facultatif Ajustementdesportes Utilisationdes commandesUtilisation DU Réfrigérateur Machineàglaçons Réglagedelhumiditédans lebacà légumesDistributeurdeau CONDITION/RAISON AjustementDistribution deau Dépose et réinstallation de la palette du distributeurLumière du distributeur Verrouillage du distributeurEntretien DU Réfrigérateur Remplacementdes ampoules d’éclairageSystèmedefiltrationdeleau NettoyageFonctionnementduréfrigérateur DépannageTempératureethumidité Le réfrigérateur ne fonctionne pasGlaçons eteau Remplacer le filtre ou le réinstaller correctementRemarque Cela indique une faible pression de leau Heures pour la fabrication de nouveaux glaçonsSystème de filtration d’eau à la grille de la base Feuilles DE Données SUR LE ProduitModèle WF-NLC120V Capacité 120 gallons 454 litres Garantie Limitée DE UN AN Garantie DES Gros Appareils Ménagers Whirlpool CorporationWhirlpool NE Prendra PAS EN Charge Composer le 1-800-253-1301. Au Canada, composer le

2314473B specifications

The Whirlpool 2314473B is a highly innovative appliance component that serves as a vital part of several Whirlpool refrigerators. Designed for enhancing the performance and convenience of refrigeration, this component boasts a host of versatile features and advanced technologies that set it apart in the marketplace.

One of the main features of the Whirlpool 2314473B is its exceptional compatibility with a wide range of refrigerator models. This compatibility ensures that users can easily replace or upgrade their refrigerator components without any hassle. The robustness of this part contributes to the overall longevity and efficiency of the refrigerator, making it a worthwhile investment for homeowners looking to maintain their appliance for years to come.

In terms of technology, the Whirlpool 2314473B incorporates advanced materials that promote durability and resistance to wear and tear. This technological edge enhances its performance under various conditions, offering reliability and efficiency that consumers can count on. The design also facilitates optimal airflow within the refrigerator, ensuring that food items retain their freshness and taste for longer periods. Efficient cooling is critical in food preservation, and the Whirlpool 2314473B excels in maintaining ideal temperatures throughout the appliance.

Another noteworthy characteristic of the Whirlpool 2314473B is its user-friendly installation process. The component comes with clear instructions that make it easy for even those with minimal DIY experience to install it correctly. This accessibility empowers homeowners to take charge of their appliance maintenance, reducing dependence on professional service providers.

Furthermore, the Whirlpool 2314473B showcases energy-efficient performance that aligns with contemporary energy-saving standards. By promoting effective energy usage, this component contributes to lower utility bills and a reduced carbon footprint, making it an environmentally conscious choice for consumers.

In summary, the Whirlpool 2314473B stands out as an essential component for Whirlpool refrigerators, equipped with features like compatibility, advanced materials, and efficiency. Its user-friendly installation process and energy-efficient performance further enhance its appeal, making it a top choice for anyone looking to ensure their refrigerator operates at peak efficiency. Investing in the Whirlpool 2314473B not only improves the functionality of the appliance but also promotes sustainability, making it a smart addition to modern kitchens.