Whirlpool MK1157XV, MK1154XV Microwave Oven Preparation, Bottom Duct Assembly, Recommended

Page 3

Recommended:

A time-delay fuse or time-delay circuit breaker.

A separate circuit serving only this microwave oven.

GROUNDING INSTRUCTIONS

For all cord connected appliances:

The microwave oven must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. The microwave oven is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING: Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the microwave oven is properly grounded.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the microwave oven.

SAVE THESE INSTRUCTIONS

Microwave Oven Preparation

1.Unplug microwave oven before proceeding with installation.

2.Remove any loose items inside microwave oven.

Bottom Duct Assembly

1.Fasten bottom bracket to bottom duct using two ¹⁄₂" screws.

(Rear view of bottom duct)

A

B

A. Bottom bracket

B. ¹⁄₂" screws

2.Remove 2 existing screws from right side of microwave oven, and 1 existing screw from left side.

3.Install bottom duct with 2 existing screws on right side of oven.

(Front view of microwave oven)

A

A. Existing screws

Side Duct and Upper Duct Assembly

1.Connect side duct to upper duct:

Insert projecting tabs of upper duct into holes of side duct. Then bend tabs upward.

A

B

A. Tabs of upper duct

B. Holes in side duct

NOTE: Remove any dirt or oil on microwave oven surface before ducts are attached.

2.Peel off backing of double-sided tape. Align the duct assembly screw hole to the existing screw hole on left side of microwave oven, and attach the duct assembly to the oven. Press down firmly on ducts, then fasten with existing screw.

A

A. Existing screw

3

Image 3
Contents Garniture Encastrée Pour Four À MICRO-ONDES Microwave Oven SafetyTools and Parts Installation InstructionsMinimum Cutout Dimensions Trim Kit Frame DimensionsRecommended Bottom Duct AssemblySide Duct and Upper Duct Assembly Microwave Oven PreparationAnti-Tip Bracket Installation Microwave Oven PlacementTrim Kit Frame Installation Outillage et pièces Instructions DinstallationDimensions minimales pour le Découpage Sécurité DU Four À MICRO-ONDESAssemblage du conduit inférieur Dimensions pour cadre de garnitureSpécifications électriques Préparation du four à micro-ondesAssemblage du conduit latéral et du Conduit supérieur Installation de la bride antibasculementMise en place du four à micro-ondes Installation du cadre de garniture