LED Indicators, Monitor Chain, RS-232

Monitor Chain

The MONITOR CHAIN connector is a 5-pin terminal block connector. Input and output connec- tions are balanced. The center pin is the shield connection for both the input and output of the monitor chain. Connection is shown at right. The left-most + and - terminals are for monitor chain input signals, while the right-most terminals are for monitor chain output signals. When powered down, a relay connects the input to the output, thus bypassing the BASIS 922dz in the monitor chain.

RS-232

The RS-232 is an optional utility serial port for accessing advanced features. Connect to an avail- able COM port on your PC and communicate using a terminal control program such as Windows Hyperterminal.

Use a normal serial data cable with a DB-9 male plug to connect to the BASIS 922dz. To connect the cable, orient the connector properly, then push into the receptacle until it is firmly seated; tighten the retaining screws “finger tight”. Communications should be 9600 baud, no parity, 8 data bits, 1 stop bit, and flow control Xon/Xoff.

Ports

PORT A through PORT D are QSC DataPorts. When using the BASIS 922dz with QSC DataPort- equipped amplifiers or QSC DSP products (DSP-3, DSP-4) connect to the BASIS 922dz using QSC DataPort cables. The 922dz supports up to eight channels of DataPort audio and amplifier status monitoring. This can be four 2-channel amplifiers or one 8-channel amplifier or other suitable combinations. If connecting a multi-DataPort amplifier, be sure to connect all the DataPorts to the same BASIS. This practice assures proper amplifier reporting in QSControl.net.

To connect the cable, orient the connector properly, then push into the receptacle until it is firmly seated; tighten the retaining screws “finger tight”.

LED Indicators

When the BASIS 922dz is plugged into a properly functioning AC outlet, it will power up and briefly display a welcome screen on the LCD display.

POWER Indicator- This blue indicator illuminates when the BASIS 922dz is plugged into a prop- erly functioning AC source. There is no power switch on the BASIS 922dz. This helps to prevent accidental system shutdowns.

DIAGNOSTIC Indicator- This red diagnostic LED reports several possible operational condi- tions. During boot-up, it is used to continually blink a “dot-dash” pattern if the power-on memory self-test fails. During normal operation, if any non-recoverable system fault occurs, the diagnos- tic indicator will remain on, requiring a power restart. If this condition persists, contact QSC’s Technical Services for assistance.

The diagnostic LED is also used to indicate an update is in progress during a remote firmware update cycle. First, the LED will blink slowly, indicating the memory erase cycle, then it will blink rapidly, indicating the memory write cycle. NOTE! During a firmware update, it is critical the unit remain powered on for the entire process in order to complete successfully.

The diagnostic LED may also be controlled by using the QSControl.net software. This feature is particularly helpful for identifying a particular unit.

(continued, next page)

Monitor Chain connection.

See explanation, at left.

Out

BASIS 922dz specifications

The QSC Audio BASIS 922dz represents a cutting-edge advancement in digital audio processing and distribution systems. Specifically designed for live performance environments, the BASIS 922dz integrates seamlessly into a wide array of sound applications, making it a versatile asset for audio professionals.

One of the key features of the BASIS 922dz is its dual-zone processing capability, allowing users to manage independent audio routing and control for two distinct areas. This flexibility is essential for venues that require different audio settings or playback sources in separate zones, ensuring that sound engineers can maintain complete control over their audio environments.

The BASIS 922dz utilizes advanced digital signal processing (DSP) technology, enabling enhanced audio clarity and fidelity. With features like equalization, crossover, and dynamic processing, sound engineers can optimize audio quality and tailor the listening experience for any venue or audience. The DSP architecture is designed for high performance, handling complex audio tasks without latency, which is crucial in live sound applications.

Connectivity is a significant aspect of the QSC BASIS 922dz, offering multiple input and output options. It supports both analog and digital audio connections, facilitating integration with a variety of sound systems and peripheral devices. This extensive connectivity supports various audio formats, ensuring compatibility with modern digital audio infrastructure.

Additionally, the BASIS 922dz is equipped with QSC’s renowned Advanced Network Technology (ANT), which allows for remote control and monitoring. This feature enables audio professionals to make real-time adjustments and fine-tune settings from a distance, significantly enhancing workflow efficiency during live events.

The unit is also designed for ruggedness and reliability, featuring a robust chassis that can withstand the rigors of touring and live performances. Its user-friendly interface simplifies operation, making it accessible for both seasoned professionals and newcomers alike.

In summary, the QSC Audio BASIS 922dz stands out as a powerful tool for audio processing and distribution. With its dual-zone capability, advanced DSP features, extensive connectivity options, and robust design, it caters to the diverse needs of the audio industry, making it an essential component in any professional sound setup. Whether for concert halls, theaters, or corporate events, the BASIS 922dz is engineered to deliver optimal sound quality and performance.