Common

PROBLEM

Spottlng and tllmlng

Small partlcles

deposlted on Items

Dishes not dry

Black marks on dishes

Chlpplng or breaklng

,* glassware

dishwashing

CAUSED BY

Hard water

Water is not hot enough

Not enough detergent, or improper detergent

“Old” detergent

Improper loading

No rinse aid

AIR DRY Setting used

Spray arm or arms not rotating freely

“Old” detergent

Not enough detergent, or improper detergent

Water is not hot enough

Water pressure may

be low, dishwasher is not filling properly

Water is not hot enough

Improper loading

No rinse aid

AIR DRY Setting used

Aluminum utensils rubbing against items during washing

Improper loading

problems

SOLUTION

Fill detergent dispensers to capacity. Use dishwasher de-

tergent with highest available phosphorus content. May be necessary to install water softener.

To remove spots and film, try a vinegar rinse...

1.Wash and rinse load as usual. Use AIR DRY.

2.Remove all metal items.

3.Put 2 cups (500 ml] white vinegar in a container on the bottom rack.

A. Run dishwasherthrough a complete washing cycle.

Water temperature should be at least 140°F (60°C). Set water heater thermostat to a higher setting. Run water at sink until hot before starting.

Use more dishwasher detergent Use detergent with high-

est available phosphorus content...especially with hard water.

Use only fresh dishwasher detergent. Store tightly closed container in cool, dry place. Discard old detergent. Do not fill dispensers until ready to start dishwasher.

Make sure dishes and glassware are loaded so spray reaches all surfaces and items drain properly. Do not ov- erload. Do not nest items.

Make sure large items do not block spray from reaching detergent dispensers.

Try a bar rinse aid such as Solid Jet-Dry? Follow package directions.

Drying without heat may result in some spotting of gkXSeS and silver.

Check spray arms to make sure they turn freely after load- ing. Be sure a utensil has not prevented their turning.

Use only fresh dishwasher detergent. Store tightly closed container in cool, dry place. Discard old detergent. Do not fill dispensers until ready to start dishwasher.

Use more dishwasher detergent. Use detergent with high-

est available phosphorus content...especially with hard water.

Water temperature should be at least 140°F (60°C). Set water heater thermostat to a higher setting. Run water at sink until hot before starting.

If water pressure is low, do not use water for other purposes while dishwasher is running (to assure correct fills).

Water temperature should be at least 140°F (60°C). Set water heater thermostat to a higher setting. Run water at sink until hot before startrng.

Make sure dishes and glassware are loaded SO Spray reaches all surfaces and items drain properly. Do not Ov- erload. Do not nest items

Try a bar rinse aid such as Solid Jet-Dry.” Follow package directions.

Allow more time when using AIR DRY Option, or use HEAT DRY. Plastic items may need towel drying.

Use care In loadlng alumlnum utensils, especially any

llghtwelght toll container. Place so they do not touch dlshes. Remove black marks with plastic scouring pad and a mild abrasive cleanser

Do not overload. Load glasses in the top rack only. Load

between prongs, not over them. Glasses loaded over prongs will not be supported and may chip or break.

DP3000XR Series specifications

The Whirlpool DP3000XR Series represents a significant advancement in home appliance technology, combining efficiency, functionality, and sleek design to meet the needs of modern households. This series includes a variety of dishwashers that are engineered to deliver superior cleaning performance while also being environmentally friendly.

One of the standout features of the Whirlpool DP3000XR Series is its advanced wash system. The series utilizes the latest in sensor technology to optimize water and energy consumption. The Adaptive Wash Technology assesses the soil level of the dishes and adjusts the wash cycle accordingly. This ensures that even heavily soiled items are cleaned effectively without wasting resources.

Another notable characteristic is the Quiet Wash system. Equipped with enhanced insulation and sound-dampening materials, the DP3000XR operates at significantly reduced noise levels, allowing users to run their dishwashers at any time without disturbing the household. This is particularly beneficial for open-concept living spaces where noise can easily carry.

The series also boasts a flexible loading system that includes adjustable racks and tines. This adaptability allows users to customize the interior space according to their needs, accommodating a larger variety of dishes and cookware. The removable silverware basket adds to this convenience, making loading and unloading simple and efficient.

Whirlpool's commitment to energy efficiency is evident in the DP3000XR Series. These dishwashers meet or exceed ENERGY STAR® standards, ensuring they consume less water and energy compared to traditional models. This not only leads to cost savings for consumers but also contributes to a more sustainable environment.

In addition to performance features, the DP3000XR Series includes intuitive controls that make operation simple. The easy-to-read LED display provides users with clear cycle status updates, while the one-touch settings allow for quick selections, reducing the complexity often associated with appliance use.

Finally, Whirlpool focuses on durability, utilizing high-quality materials that stand the test of time. The DP3000XR incorporates a stainless steel tub that resists stains and odors, contributing to a cleaner and more hygienic washing environment.

In summary, the Whirlpool DP3000XR Series combines cutting-edge technology and user-friendly features with a focus on energy efficiency and durability, making it a top choice for efficient and effective dishwashing in today’s busy homes.