Whirlpool DP3000XR Series Selecting a cycle, To add a dish after starting, Cycle Control Knob

I

CYCLE CONTROL KNOB

Selecting a cycle

NORMAL WASH Cycle

A double wash for normal to heav- ily soiled loads. (The Energy Guide Label data is based on this cycle.) Cycle time is about 65 minutes.

LIGHT WASH Cycle

For normal, everyday soiled loads.

Cycle time is about 60 minutes.

RINSE & HOLD Cycle

For rinsing a few items to be washed one or more days later. Cycle time is about 10 minutes.

Use AIR DRY onlv.

HEAT DRY or AIR DRY?

If the HEAT DRY Option is selected, air in the dishwasher is heated during the “dry” part of the cycle.

If the AIR DRY Option is selected, air in the dishwasher is not heated. Using this option helps save energy, but dishes take longerto dry (over-

night) and some water spotting may result. Some items (such as plastics) may need towel drying.

For best results, use a solid rinse aid.

To add a dish after starting

1.To be sure the added item is washed and rinsed, make sure the Cycle Control Knob has not passed LIGHT.

2.Lift up on the door latch to unlatch the door and to stop the cycle. Don’t open the door until the spray arms stop spinning.

3.Open the door and add the dish.

4. Close the door. Do not latch it. Wait 30 sec-

onds	for air	in the	dishwasher		to warm		ub This
							..	-r’	....-
helps reduce the amount of mois :tl._Ire. thnt.-.
can come from the vent when restarting the
cycle.
5. press	door	firmly	to Intoh	it	Thor	rlichumchnr			I”,
			l”,“,	I II.	II lb	“,.zI		I..“.Jl

will automatically stlart where it stopped.

9