Whirlpool Dishwasher installation instructions Recommended drain hose connection methods, Lv7

Recommended drain hose connection methods:

Drain hose to air gap to waste tee.

Alternate drain hose connection methods:

Drain hose to waste tee.

Cut hose connector to fit.

	Rubber	connect
	Part No.	674361
	-1-&mps
		/	Screw-
		h	type
20” 151 cm1
&i;;lbmy	t j		Waste	tee
clearance			(1Part	No.
to floor	Entrymmus it -		6751491

be above trap.

f

Drain hose to air gap to disposer.

k300096)

connector

Es-1-.

;;;;P;;m)	’	I
clearance	Lv7	I	1
to floor
	Entry	must	be
I
I	above	trap.
		’	I

If local plumbing codes permit, dishwasher drain hose may be connected directly to waste tee (Part No. 675149)‘. The waste tee connection MUST be made ahead of the trap and a minimum of 20 inches above the floor.

Drain hose to disposer.

- Do Not

y cut hose connector.

.--.Screw-type

clearance I1 to floor

kzJ@”

I

E:try must be above trap

above trap.

Install air gap (Part No. 300096)* according to kit instruc- tions. If other brands of air gaps are used, they should be checked to make sure they allow for the same water flow.

Connect the air gap to a waste tee (Part No. 675149)’ or disposer using a rubber connector (Part No. 674381)*.

Most disposers have 7/e”connectors or special connectors are available at plumbing supply houses.

Be sure to remove the disposer plug before connecting the drain hose.

If local plumbing codes permit, dishwasher drain hose may be connected directly to a disposer. Most disposers have 7/e”connectors or special connectors are available at plumbing supply houses. Be sure to remove the disposer plug before connecting the drain hose.

*All parts are available through your dealer.

(continued)

3369671 -C 8