Whirlpool 960 warranty Setting the Controls, Selecting a wash cycle

Page 13

Setting the Controls

Operating your dishwasher’s controls properly helps you obtain the best possible washing results. This section tells you how to select wash cycles and options.

Selecting a wash cycle

Press a Cycle pad. The dishwasher starts filling once you press a Cycle pad unless you select the delay wash cycle. You may press Option pads as the machine is filling.

	T A ‘v’ shows	what each cycle	includes-	CYCLE
		vlAlN	INAL	TIME
CYCLE	IINSE	I/ASH UNSE	IINSE )RY	Minutes:
			-
RlNSEiWASH	LATER
For rinsing a few items to
be washed one or more
days	later.		.	12

l Do not use detergent.

l Water is not heated

during Rinse/Wash Later.

l Air Dry is automatically selected.

LOW ENERGY/CHINA

Single wash for prerinsed or lightly soiled loads.

l Select High Temp Wash

to heat water in the main01d-t60* wash (marked +).

l The water heats to 140°F (60%) in the final rinse (marked++) unless you select Low Energy Rinse.

NORMAL

.etd-t66’

to heat water in the main wash (marked f).

l The water heats to 140°F (60°C) in the final rinse (marked++) unless you select Low Energy Rinse.

continued on next page

13

Image 13

Contents UseAndCare Please record your model’s information Thank you for buying a WHIRLPOOL@ applianceYour safety is important to us Dishwasher SafetyControl panel Parts and FeaturesBefore You Use Your Dishwasher Starting Your DishwasherStopping the dishwasher Starting a wash cyclePreparing to load Loading Your DishwasherDishwasher Loading the cutlery basketTo remove the basket Loading the silverware basketTo replace the basket To open the basketMixed load Loading the bottom rackUtensil load Fold-down dividerLoading the top rack Infinite Adjustable Top RackCup and glass load Extra-capacity fold-down shelvesUsing the detergent dispenser Using the DispensersIwater Type Where to Fill Filling the detergent dispenserTo check dispenser Using the rinse agent dispenserTo fill dispenser Selecting a wash cycle Setting the ControlsTo clear the indicators Using Cancel/DrainTo cancel a cycle Selecting cycle option Changing a cycle or an option settingCycle Using the delay washUnderstanding the status indicators Material Washing Special ItemsDishwasher SAFE? Caring for Your Dishwasher Cleaning the interiorOverfill protector Loading tips Saving EnergyCycle and option tips Solution Solving Common Dishwashing ProblemsChart ProblemSpotting Incorrect amount Cause Removing spots and filmProblems TroubleshootingCheck the Following If you need FSP Replacement parts If you need service’If you are not satisfied with how the problem was solved Reauestina Assistance or Se&iceIndex Power Clean washing system parts covered by your warranty Warranty