Whirlpool 960 warranty Using Cancel/Drain, To clear the indicators, To cancel a cycle

Page 14

CYCLE

HEAVY

l The water heats to 140°F (60%) in the final rinse (marked ++)unless you select Low Energy Rinse.

POTS-N-PANS

T A “@”shows

what each cvcle

includes

CYCLE

 

MAIN

INAL

TIME

WASH IINSE

YASH #INSE

IINSE

Minutes)

.

.

l tt

l

76.

et

.

l t

@t-t .

76*

(marked +).

l The water heats to 140°F (60°C) in the final rinse (marked ++)unless you select Low Energy Rinse.

l Cycle time includes dry time and may be longer depending on the temperature of water entering the dishwasher. The cooler the water, the longer the cycle time. If the water is already hot enough, the cycle times will be as shown.

Using Cancel/Drain

Press Cancel/Drain to cancel a cycle or to clear the indicators.

To clear the indicators:

Press Cancel/Drain before starting

the dishwasher to clear all cycle and option selections.

To cancel a cycle:

l

l

Press Cancel/Drain while the dishwasher is running to start a 2-minute

drain. It will take a few seconds for the drain to start. If desired, select a new cycle. (See “Changing a cycle or an option setting” on page 15.)

You can press Cancel/Drain again to stop the drain immediately. Remember to drain the dishwasher again before starting a new cycle.

NOTE: A small amount of water remaining in the dishwasher is normal.

14

Image 14
Contents UseAndCare Thank you for buying a WHIRLPOOL@ appliance Please record your model’s informationDishwasher Safety Your safety is important to usParts and Features Control panelStarting Your Dishwasher Before You Use Your DishwasherStarting a wash cycle Stopping the dishwasherDishwasher Loading Your DishwasherPreparing to load Loading the cutlery basketTo replace the basket Loading the silverware basketTo remove the basket To open the basketUtensil load Loading the bottom rackMixed load Fold-down dividerCup and glass load Infinite Adjustable Top RackLoading the top rack Extra-capacity fold-down shelvesIwater Type Where to Fill Using the DispensersUsing the detergent dispenser Filling the detergent dispenserTo fill dispenser Using the rinse agent dispenserTo check dispenser Setting the Controls Selecting a wash cycleTo cancel a cycle Using Cancel/DrainTo clear the indicators Changing a cycle or an option setting Selecting cycle optionUsing the delay wash CycleUnderstanding the status indicators Dishwasher SAFE? Washing Special ItemsMaterial Overfill protector Cleaning the interiorCaring for Your Dishwasher Cycle and option tips Saving EnergyLoading tips Chart Solving Common Dishwashing ProblemsSolution ProblemSpotting Incorrect amount Removing spots and film CauseCheck the Following TroubleshootingProblems If you are not satisfied with how the problem was solved If you need service’If you need FSP Replacement parts Reauestina Assistance or Se&iceIndex Power Clean washing system parts covered by your warranty Warranty