Whirlpool 9200 SERIES manual Controlpanel lock-out feature, Thebeeping sound

Page 6

Operating Instructions

Continued

Controlpanel lock-out feature

This feature lets you lock-out the function of the control pads (except to cancel or pause a cycle that is running). When the control panel is locked- out, the dishwasher cannot be started and a running cycle cannot be changed.

To use the lock-out feature:

1. Press and hold the OPTIONS and DELAY pad until the CLEAN signal light flashes.

2. Release the pads. The CLEAN signal light will stop flashing.

To cancel the lock-out teature:

1. Press and hold the OPTIONS and DELAY the CLEAN signal light turns on and

2. Release the pad. The CLEAN signal light will turn off.

Thebeeping sound

Each time a control pad is pressed, a single “beep” sound is made. A double beep means one of the extra features was selected (such as control panel lock-out) or the wrong control pad was used.

To turn off the beep:

1. Press and hold the OPTIONS pad until the CLEAN signal light flashes.

2. Release the pad. The CLEAN signal light will turn off.

NOTE: A power failure WIII reset this feature. You will have to redo the above steps.

To turn the beep back on:

1. press and hold the OPTIONS pad until the CLEAN signal light turns on and stays on.

2. Release the pad. The CLEAN signal light will turn off.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 9200SERIESDISHWASHERS Contents OperatingInstructions ImportantSafetyInstructionsUsingyour dishwasher for the first time Beforestarting your dishwasherChanginga cycle setting Startingyour dishwasherOperating Instructions Delaying a wash TheCANCEL/DRAINpadUsin$ cycle pause Controlpanel lock-out feature Release the pad. The Clean signal light will turn offThebeeping sound Signal light turns on TheWATERHEATINGsignal lightTheCLEANsignal light Door is openedWhat happensin eachcycle Heavy Cycle‘Cycle time includes heated dry times Washt Rinsett Whathappensin each option ProperLoading Proper Loading Silverware basket loading Do not add detergent until you are ready to Store detergent.tightly closed in a cool, dry placeUsingRinseAgentDispenser ForBestResults SpecialtipsPage CommonDishwashingProblems Especially with hard waler Old detergent Undissolved detergent coming in contact with flatwareIfYouNeedServiceOrAssistance We suggestyou follow these stepsIf you need service’ 123WPLE If you need FSP’* replacement parts’WASHlNG&24INESDRYERS LlROWERS- SERvlClNC Page Power CLEAN’ washing system parts covered by your warranty DishwasherWarranty
Top Page Image Contents