Whirlpool 9200 SERIES manual Whathappensin each option

Operating Instructions

Continued

Rinse 8 Hold Cycle

For rinsing a few items to be washed one or more days later. Cycle time is about 12 minutes.

I

I

I

RinseI

Rinse

I

1

Whathappensin each option

Options can be selected by pressing the OPTIONS pad. Each press of the pad advances the selection to the next option. You can select Heat Dry, Heat Dry and Hi-Temp. Air Dry.or Air Dry and HI-Temp. For example, if the AIR DRY signal light is on and you want to select the Heat Dry Option, press the OPTIONS pad twice.

NOTE:

l All options can be changed any time during a cycle.

l The Hi-Temp Option IS preset for the Pots & Pans Cycle, only Heat Dry or Air Dry Options can be selected.

lIf the Rinse 8 Hold Cycle is selected, options are not available.

Heat Dry Option

The HEAT DRY signal light will be on when the Heat Dry Option is selected. Heat dry means the air in the dishwasher is heated during the “dry” portron of any cycle - except the Rinse 8 Hold Cycle.

For best drying results, use a liquid rinse agent such as Jet-Dry.”

Air Dry Optlon

The AIR DRY signal light will be on when the Air Dry Option is selected. The Air Dry Option helps save energy, but the load takes longer to dry (over- night) and some spotting may result. Some items (such as plastics) may need towel drying.

For best drying results, use a liquid rinse agent such as Jet-Dry.‘R

HI-Temp Optlon

When Ihe Hi-Temp Option is selected, water for the first wash (if present), main wash and lhe final rinse is heated to 140°F (60°C). Whrle the water is heating, Ihe WATER HEATING signal light will be on. Pots B-Pans Cycle has the Hi-Temp Optron preset. Hi-Temp Option cannot be selected wilh the Rinse 8 Hold Cycle.

10