Whirlpool MFL57066201, W10217293A manual Installation Instructions, Unpacking, LocationRequirements

Page 5

INSTALLATION INSTRUCTIONS

Unpacking

1.Empty the microwave oven of any packing materials.

2.Clean the inside with a soft, damp cloth.

3.Check for damage, such as:

■a door that is not lined up correctly

■damage around the door, or

■dents on the interior or exterior of the microwave oven.

If there is any damage, do not operate the microwave oven until a designated service technician has checked it and made any needed repairs.

LocationRequirements

WARNING

Excessive Weight Hazard

Use two or more people to move and install microwave oven.

Failure to do so can result in back or other injury.

IMPORTANT: The control side of the microwave oven is the heavy side. Handle the microwave oven gently. The weight of the microwave oven is over 35 lbs (15.9 kg).

■Place the microwave oven on a cart, counter, table or shelf that is strong enough to hold the microwave oven and the food and utensils you place inside it.

■The microwave oven should be at a temperature above 50°F (10°C) for proper operation.

NOTE: Some models can be built into a wall or cabinet by using one of the trim kits listed in the “Assistance or Service” section.

■Do not block the exhaust vents or air intake openings. Allow a few inches of space at the back and side of the microwave oven where the exhaust vents are located. Blocking the exhaust vents could cause damage to the microwave oven, as well as poor cooking results.

■Make sure the microwave oven legs are in place to ensure proper airflow. If vents are blocked, a sensitive thermal device may automatically turn the microwave oven off. The microwave oven should work properly once it has cooled.

ElectricalRequirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Observe all governing codes and ordinances.

Required:

■A 120 Volt, 60 Hz, AC only, 15- or 20-amp electrical supply with a fuse or circuit breaker.

Recommended:

■A time-delay fuse or time-delay circuit breaker.

■A separate circuit serving only this microwave oven.

GROUNDING INSTRUCTIONS

■For all cord connected appliances:

The microwave oven must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. The microwave oven is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING: Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the microwave oven is properly grounded.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the microwave oven.

SAVE THESE INSTRUCTIONS

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents W10217293A Microwave OvenTable of Contents Your safety and the safety of others are very important Microwave Oven SafetyThis device complies with Part 18 of the FCC Rules Unpacking Installation InstructionsLocationRequirements ElectricalRequirementsTo Install Parts and FeaturesTurntable DisplayTimer JetStartFeatureStart OffMicrowave Oven USE FoodCharacteristicsCookingGuidelines CookwareandDinnerwareManualCooking MicrowaveCookingPowerAluminumFoilandMetal SensorCooking CookinginStagesSensorPopcorn To Cook in StagesSensorReheat SensorCookTo Use Sensor Cook To Use Sensor ReheatWarmHold AutoDefrostTo Use Auto Defrost To Use for single cycleMicrowave Oven Care GeneralCleaningTroubleshooting ReplacementParts Assistance or ServiceIntheU.S.A Built-InKitsItems Excluded from Warranty Limited WarrantyThis limited warranty does not cover Disclaimer of Implied Warranties Limitation of Remedies

MFL57066201, W10188233A, W10217293A specifications

The Whirlpool MFL57066201, W10217293A, and W10188233A are essential components designed to enhance the performance and versatility of Whirlpool appliances, primarily focusing on refrigerators and washing machines. Each part plays a unique role in ensuring the efficient operation and longevity of these household appliances.

The MFL57066201 is a door assembly hinge kit that provides stability and ease of access for refrigerator doors. It is engineered to withstand daily usage, reducing wear and tear over time. The hinge is designed for a perfect fit, ensuring that the refrigerator door closes securely and maintains optimal temperature conditions. This part is crucial for preventing energy loss, which can lead to increased electricity bills. Its durable construction also means that homeowners can rely on it for many years without the need for frequent replacements.

W10217293A is a premium ice maker kit compatible with various Whirlpool refrigerator models. This kit showcases the latest technology in ice production, providing quick and efficient ice-making capabilities. With its sleek design and easy installation, it fits seamlessly into many fridge setups. Users can expect a higher ice production rate than standard models, allowing for plenty of ice for beverages and parties. The kit is designed to be energy-efficient, translating to less power consumption while delivering maximum output.

The W10188233A is a washing machine door lock assembly designed for enhanced safety and security during the washing cycle. This innovative part ensures that the door remains securely closed while the machine is in operation, preventing accidents and making the washing process more efficient. The lock assembly is easy to install and helps protect the interior components of the machine from water damage. Additionally, its robust construction ensures durability, offering peace of mind to users who frequently rely on their washing machines.

Collectively, these components represent Whirlpool's commitment to quality and innovation in home appliances. They are designed not only for efficiency but also for user convenience, ultimately improving the overall functionality of Whirlpool products. Whether enhancing refrigeration capabilities or providing safety in washing machines, these parts make daily household tasks easier and more reliable. Investing in these high-quality components means investing in the longevity and performance of your Whirlpool appliances.
Top Page Image Contents