Whirlpool W10188233A manual JetStartFeature, Off, Clock, Tones, Timer, ControlLock, DemoMode

Page 7

Start

The START pad begins any function. If non-sensor cooking is interrupted, touching START will resume the preset cycle. Touching START will not resume an interrupted sensor cycle.

JetStartFeature

The JET START control (START pad) automatically starts the microwave oven at 100% power for 30 seconds, and adds

30 seconds of cook time, up to 3 minutes, then 1 minute of cook time, up to 10 minutes with each additional touch of the control.

Time may be added in 30-second increments to any manual cooking cycle, at the current power level, by touching the JET START control during cooking.

Off

The OFF (OFF CANCEL) pad clears any incorrect command and cancels any program during cooking. It will not erase the time of day. OFF is also used to lock and unlock the control panel. See “Control Lock” section.

The microwave oven will also turn off when the door is opened. Close the door and touch START to resume the non-sensor cycle.

Clock

This is a standard 12-hour clock (12:00-11:59).

To Set:

The microwave oven and Timer must be off.

1.Touch CLOCK.

2.Touch number pads to enter correct time of day.

3.Touch CLOCK.

The clock may be hidden using Options. See “Options” section.

Tones

Tones are audible signals that may be turned off using Options. See “Options” section. These tones indicate the following:

One tone

■Valid entry (short tone)

■Hidden feature entered (long tone)

Two tones

■End of stage in multistage cooking

■Invalid entry (short tones)

■Every minute after end-of-cycle tones, as reminder

■Hidden feature exited

Three tones

■End of cycle

Five tones

■End of Timer countdown

■During Defrost cycle, reminder to check, turn, rearrange, or separate food

Timer

The Timer can be set in minutes and seconds, up to 99 minutes 99 seconds, and counts down the set time.

NOTE: The Timer does not start or stop the microwave oven.

Cook functions may be used while the Timer is counting down. When the cook function is active in the display, touch TIMER SET/OFF to see the Timer count down for 5 seconds.

To Set:

1.Touch TIMER SET/OFF.

2.Touch number pads to enter desired time.

3.Touch TIMER SET/OFF or START, or allow the Timer to start automatically after a brief delay.

When the set time ends, “TIMER END” will scroll across the display and the end-of-Timer tones will sound.

4.Touch TIMER SET/OFF twice at anytime to cancel the Timer.

Touching the OFF pad will turn the microwave oven off if cooking during Timer function.

The time can be reset during the countdown by canceling Timer, then repeating the above steps.

ControlLock

The Control Lock shuts down the control panel pads to avoid unintended use of the microwave oven.

To Lock/Unlock Control: The microwave oven and Timer must be off. Touch and hold OFF for approximately 5 seconds until

1 tone sounds and “LOCKED” appears in the display. Repeat to unlock the control. Two tones will sound, and the display will return to the time of day.

DemoMode

The Demo Mode is ideal for learning how to use the microwave oven. When set, functions can be entered without actually turning on the magnetron. The microwave oven light will come on, the fan will run, the countdown will run very quickly in the display, and the turntable will rotate.

To Turn On/Off: The microwave oven and Timer must be off. Touch and hold TIMER SET/OFF for 5 seconds until 1 tone sounds. Repeat to turn off.

Options

Settings can be selected, and displays can be changed by using Options.

To Change Options: Touch OPTIONS repeatedly to select the option, then follow instructions on the display to select the setting.

OPTION

SETTING

Sound (tones)

Turn on or off.

 

 

Clock

Turn on or off (hidden).

 

 

Scroll speed

Change speed (slow, normal or fast).

 

 

Weight

Change to standard (lbs) or metric (kgs).

 

 

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents W10217293A Microwave OvenTable of Contents Your safety and the safety of others are very important Microwave Oven SafetyThis device complies with Part 18 of the FCC Rules ElectricalRequirements Installation InstructionsUnpacking LocationRequirementsDisplay Parts and FeaturesTo Install TurntableOff JetStartFeatureTimer StartCookwareandDinnerware FoodCharacteristicsMicrowave Oven USE CookingGuidelinesAluminumFoilandMetal MicrowaveCookingPowerManualCooking To Cook in Stages CookinginStagesSensorCooking SensorPopcornTo Use Sensor Reheat SensorCookSensorReheat To Use Sensor CookTo Use for single cycle AutoDefrostWarmHold To Use Auto DefrostMicrowave Oven Care GeneralCleaningTroubleshooting Built-InKits Assistance or ServiceReplacementParts IntheU.S.ADisclaimer of Implied Warranties Limitation of Remedies Limited WarrantyItems Excluded from Warranty This limited warranty does not cover

MFL57066201, W10188233A, W10217293A specifications

The Whirlpool MFL57066201, W10217293A, and W10188233A are essential components designed to enhance the performance and versatility of Whirlpool appliances, primarily focusing on refrigerators and washing machines. Each part plays a unique role in ensuring the efficient operation and longevity of these household appliances.

The MFL57066201 is a door assembly hinge kit that provides stability and ease of access for refrigerator doors. It is engineered to withstand daily usage, reducing wear and tear over time. The hinge is designed for a perfect fit, ensuring that the refrigerator door closes securely and maintains optimal temperature conditions. This part is crucial for preventing energy loss, which can lead to increased electricity bills. Its durable construction also means that homeowners can rely on it for many years without the need for frequent replacements.

W10217293A is a premium ice maker kit compatible with various Whirlpool refrigerator models. This kit showcases the latest technology in ice production, providing quick and efficient ice-making capabilities. With its sleek design and easy installation, it fits seamlessly into many fridge setups. Users can expect a higher ice production rate than standard models, allowing for plenty of ice for beverages and parties. The kit is designed to be energy-efficient, translating to less power consumption while delivering maximum output.

The W10188233A is a washing machine door lock assembly designed for enhanced safety and security during the washing cycle. This innovative part ensures that the door remains securely closed while the machine is in operation, preventing accidents and making the washing process more efficient. The lock assembly is easy to install and helps protect the interior components of the machine from water damage. Additionally, its robust construction ensures durability, offering peace of mind to users who frequently rely on their washing machines.

Collectively, these components represent Whirlpool's commitment to quality and innovation in home appliances. They are designed not only for efficiency but also for user convenience, ultimately improving the overall functionality of Whirlpool products. Whether enhancing refrigeration capabilities or providing safety in washing machines, these parts make daily household tasks easier and more reliable. Investing in these high-quality components means investing in the longevity and performance of your Whirlpool appliances.
Top Page Image Contents