Whirlpool W10188233A, W10217293A CookinginStages, SensorCooking, SensorPopcorn, To Cook in Stages

Page 10

CookinginStages

The microwave oven can be set to cook at different cooking powers for various lengths of time, up to 3 stages, plus a defrosting stage.

To Cook in Stages:

1.Place food on the turntable and close the door.

2.Touch COOK TIME.

“STAGE 1 ENTER COOK TIME” will scroll across display. Enter the length of time to cook during the 1st stage.

3.Touch COOK POWER, then enter the desired cooking power for the 1st stage. See “Microwave Cooking Power.”

4.Repeat steps 2 and 3 for each additional stage.

5.Touch START.

Two tones will sound between stages.

When the cycle ends, “END” will appear in the display, and the end-of-cycle tones will sound, followed by reminder tones.

6.Touch OFF or open the door to clear the display and/or stop reminder tones.

Cook time may be added in 30-second increments during the cycling stage by touching JET START control.

SensorCooking

A sensor in the microwave oven detects humidity released from the food as it heats, and adjusts the cook time accordingly.

Many sensor cycles require the covering of foods. Microwave- safe containers or steamers with loose-fitting lids are recommended. The loose-fitting lid allows enough steam to escape to be detected by the sensor. When covering foods with plastic wrap, be sure to leave a large enough vent opening to allow the steam to escape.

NOTES:

■The microwave oven should be plugged in for at least 3 minutes.

■The microwave oven cavity and the exterior of the cooking container should be dry.

■The room temperature should not exceed 95°F (35°C).

■If the door is opened during a sensor cycle, sensing will stop and the program will be canceled.

SensorPopcorn

The sensor in the microwave oven determines the appropriate popping time of commercially packaged microwavable popcorn.

NOTE: During Popcorn function, as with all microwave cooking functions, the microwave oven should be attended at all times. Listen for popping to slow to 1 pop every 1 or 2 seconds, then stop the cycle.

■To avoid damage to the microwave oven, do not use regular paper bags or glassware.

■Pop only 1 package of popcorn at a time.

■Follow manufacturer’s instructions when using a microwave popcorn popper.

■For best cooking results, do not try to pop unpopped kernels.

■Use fresh bags of popcorn for optimal results.

■Cooking results may vary by brand and fat content. For bag sizes not listed in this section, follow directions on the package.

There are 2 popcorn functions: Regular and Snack. Use Regular for bag sizes 3.5 oz (99 g) and 3.0 oz (85 g). Use Snack for bag size 1.75 oz (50 g).

To Use POPCORN:

1.Place popcorn bag on the turntable and close the door.

2.Touch POPCORN once for Regular, or twice for Snack.

Touch START, or wait for the microwave oven to start the popping cycle automatically.

When the cycle ends, “END” will appear in the display, and the end-of-cycle tones will sound, followed by reminder tones.

3.Touch OFF or open the door to clear the display and/or stop reminder tones.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Microwave Oven W10217293ATable of Contents Microwave Oven Safety Your safety and the safety of others are very importantThis device complies with Part 18 of the FCC Rules LocationRequirements Installation InstructionsUnpacking ElectricalRequirementsTurntable Parts and FeaturesTo Install DisplayStart JetStartFeatureTimer OffCookingGuidelines FoodCharacteristicsMicrowave Oven USE CookwareandDinnerwareAluminumFoilandMetal MicrowaveCookingPowerManualCooking SensorPopcorn CookinginStagesSensorCooking To Cook in StagesTo Use Sensor Cook SensorCookSensorReheat To Use Sensor ReheatTo Use Auto Defrost AutoDefrostWarmHold To Use for single cycleGeneralCleaning Microwave Oven CareTroubleshooting IntheU.S.A Assistance or ServiceReplacementParts Built-InKitsThis limited warranty does not cover Limited WarrantyItems Excluded from Warranty Disclaimer of Implied Warranties Limitation of Remedies

MFL57066201, W10188233A, W10217293A specifications

The Whirlpool MFL57066201, W10217293A, and W10188233A are essential components designed to enhance the performance and versatility of Whirlpool appliances, primarily focusing on refrigerators and washing machines. Each part plays a unique role in ensuring the efficient operation and longevity of these household appliances.

The MFL57066201 is a door assembly hinge kit that provides stability and ease of access for refrigerator doors. It is engineered to withstand daily usage, reducing wear and tear over time. The hinge is designed for a perfect fit, ensuring that the refrigerator door closes securely and maintains optimal temperature conditions. This part is crucial for preventing energy loss, which can lead to increased electricity bills. Its durable construction also means that homeowners can rely on it for many years without the need for frequent replacements.

W10217293A is a premium ice maker kit compatible with various Whirlpool refrigerator models. This kit showcases the latest technology in ice production, providing quick and efficient ice-making capabilities. With its sleek design and easy installation, it fits seamlessly into many fridge setups. Users can expect a higher ice production rate than standard models, allowing for plenty of ice for beverages and parties. The kit is designed to be energy-efficient, translating to less power consumption while delivering maximum output.

The W10188233A is a washing machine door lock assembly designed for enhanced safety and security during the washing cycle. This innovative part ensures that the door remains securely closed while the machine is in operation, preventing accidents and making the washing process more efficient. The lock assembly is easy to install and helps protect the interior components of the machine from water damage. Additionally, its robust construction ensures durability, offering peace of mind to users who frequently rely on their washing machines.

Collectively, these components represent Whirlpool's commitment to quality and innovation in home appliances. They are designed not only for efficiency but also for user convenience, ultimately improving the overall functionality of Whirlpool products. Whether enhancing refrigeration capabilities or providing safety in washing machines, these parts make daily household tasks easier and more reliable. Investing in these high-quality components means investing in the longevity and performance of your Whirlpool appliances.
Top Page Image Contents