Whirlpool Comprehensive Microwave Installation Instructions

Page 2

INSTALLATION INSTRUCTIONS

Tools and Parts

Tools Needed

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

Measuring tape

Drill

Pencil

7/64" drill bit

Phillips screwdriver

Parts Supplied (not shown to scale)

 

 

 

 

 

 

 

 

Rails (2)

Bottom duct

Trim kit frame

 

 

 

 

Short screws (14)

Long wood screws (6 - painted)

(11 + 3 extra)

(4 + 2 extra)

Location Requirements

The microwave oven may be installed over a built-in oven. If installing over a built-in oven, make sure there is a minimum of 3" (7.6 cm) between the top of the lower oven cutout and the microwave oven cutout floor.

The microwave oven may also be installed in a cabinet by itself (without a built-in oven below). For best usability, we recommend a minimum distance of 36" (91.4 cm) from the floor to the cutout floor.

Make sure the surrounding cabinetry has clearance to open and close freely. Allow a clearance of at least 1⁹⁄₁₆" (4.0 cm) below the cutout floor (3" [7.6 cm] for installation above a built-in oven), and a clearance of at least 2" (5.1 cm) above the cutout opening.

 

A

2"

2"

(5.1 cm)

(5.1 cm)

B

B

1⁹⁄₁₆"

3"

(4.0 cm)

(7.6 cm)

 

 

C

D

36"

(91.4 cm)

 

E

 

A. Upper cabinet

D. Lower cabinets

B. Microwave oven cutout

E. Floor

C. Lower oven cutout

 

Required Cutout Dimensions

22³⁄₄"

 

 

(57.8 cm)

 

 

 

 

1¹⁄₁₆"

 

 

(2.7 cm)

17" (43.2 cm)

Width

A

min.

25¹⁄₂" (64.8 cm)

 

17¹⁄₈" (43.5 cm)

 

 

max.

 

 

3"

1¹⁄₁₆"

(2.7 cm)

(7.6 cm)

 

 

B

A. Trim kit frame overhang

B. Cutout for lower oven

NOTES:

Height dimension is critical: 17" (43.2 cm) minimum, 17¹⁄₈" (43.5 cm) maximum.

Width and depth measurements have ±1/16" (2 mm) tolerance.

3" (7.6 cm) minimum dimension is from lower oven cutout ceiling to microwave oven cutout floor.

Trim kit frame extends 1¹⁄₁₆" (2.7 cm) above and below the cutout opening.

Trim Kit Frame Dimensions

 

 

 

 

 

 

 

 

26⁷⁄₈" (68.2 cm)**

 

 

 

 

 

 

 

 

 

 

 

 

 

29³⁄₄" (75.6 cm)**

 

 

 

 

 

 

 

 

 

 

 

 

 

25" (63.5 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18⁷⁄

"

 

 

 

 

2¹⁵⁄₁₆"

 

 

 

 

 

 

 

 

 

 

 

 

(7.5 cm)

 

 

 

 

 

 

 

(47.9

cm)

 

 

 

 

 

 

13¹⁄

₁₆"

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(33.2

cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

¹³⁄₁₆" (2.1 cm)**

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2³⁄₈" (6.0 cm)**

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1" (2.5 cm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*27" (68.6 cm) trim kit

**30" (76.2 cm) trim kit

2

Image 2
Contents Microwave Oven Safety Garniture Encastrée Pour Four À MICRO-ONDESTrim Kit Frame Dimensions Installation InstructionsRequired Cutout Dimensions Tools and PartsPrepare Cutout/Cabinet Opening Electrical RequirementsPrepare Microwave Oven Install the Microwave Oven Rail guides Rails Bottom duct flange B. Mounting holesInstall Trim Kit Frame Page Sécurité DU Four À MICRO-ONDES Instructions D’INSTALLATIONExigences demplacement Outillage et piècesSpécifications électriques Dimensions nécessaires de louverture DencastrementDimensions du cadre de la trousse de Garniture Préparation du four à micro-ondes Préparation de louverture Dencastrement/dans le placardInstallation du four à micro-ondes Installation du cadre de la trousse De garniture W10434148A SP PN W10434150A