7
NK1U
English
Installing the I/F (Interface) BOXNote:
•
Install the I/F BOX in a cool location, as far away
as possible from magnetic items.
•
Do not stack the I/F BOX with other units. Heat and
other influences can create the risk of I/F BOX
malfunction.
Installing
1. A ffix male hook-and-loop fasteners to the
bottom of the I/F BOX and female hook-and-
loop fasteners to the installation location in the
vehicle.
2. A ffix the male and female hook-and-loop
fasteners so they align with each other and
secure the I/F BOX in place.
Note:
Use a dry cloth to wipe the hook-and-loop fastener
installation locations free of dust and oil.
Installing the RDS-TMC AntennaInstalling
1. Determine the attaching position of the RDS-
TMC antenna.
Note:
•
Please set up the RDS-TMC antenna to become
the best reception.
•
Keep the RDS-TMC antenna cord fairly straight
(not curled or bent) for best reception.
•
Attach the RDS-TMC antenna in an area within 15
mm to 25 mm (0.59" to 0.98" ) from the front pillar
where it does not interfere with vehicle operation.
•
For installation location of the antenna, follow the
local rules and regulations.
2. Use the cord holders to secure the antenna
cable.
Note:
•
Use a dry cloth to wipe the installation location free
of dust and oil.
•
It takes about 24 hours for the adhesive tape to
achieve full adhesion.
3. Connect the RDS-TMS antenna to the RDS-
TMC input terminal on the Car Dock (see
Wire Connection (P.8 ).).
1 Hook-and-loop
fasteners (male)
2 Hook-and-loop
fasteners
(
female
)
I/F BOX
WARNING
•Run cables to avoid any hindrance of the
driver's view.
•Secure cords with tape or by other means
to ensure they do not interfere with driver
operations.