Clarion NK1U manual Wire Connection, Connecting the Car Dock and I/F Interface BOX

English

Wire Connection

WARNING

•Be sure to read the “Safety Precautions” section of this manual before installing the Car Dock or performing wiring.

•Disconnect the negative terminal of the battery before connecting wires. Failure to do so creates the risk of electric shock and personal injury due to short circuiting. Short circuiting also can result in damage to internal components.

Connecting the Car Dock and I/F (Interface) BOX

Note:

•To output ClarionMiND sound through the vehicle speakers, use the supplied audio cable to connect the I/F BOX to the vehicle audio system's AUX in terminal.

•Navigation interrupt can be enabled by connecting the power cord's phone mute lead to a vehicle audio system that supports phone muting. To use this function, you need to configure TEL-mute function settings on the vehicle audio system. For details, see the user documentation that comes with the vehicle audio system.

•The first part of the navigation voice may be broken depending on your audio system. If this happens, do not connect the phone mute lead. Set the audio system in AUX mode or set the ClarionMiND built-in speaker to output the voice guidance.

Power cords	Brown	Phone mute lead
		Connect to the vehicle audio system Phone-mute terminal.

Orange/White ILLUMI power cord

Connect to power that is supplied when car lights are turned on.

Black Ground cord

Connect to the vehicle metal.

I/F BOX

Audio cable

Vehicle audio system's AUX in

Red

Yellow

Accessory (ACC) power cord

Connect to power that can be turned on and off with the ignition key.

Main power cord

Connect to an uninterrupted power supply.

Car Dock

Connection cable

Use the 3 cord holders to	6 RDS-TMC antenna
secure the connection cable.

8 NK1U