Attaching and Removing the ClarionMiND
Note:
•Before attaching the ClarionMiND, check to make sure that the Car Dock is correctly installed and connected.
•Before attaching the ClarionMiND, first remove the supplied plug cover from the Car Dock. When the ClarionMiND is not connected to the Car Dock, be sure to install the plug cover to protect the connectors.
Attaching
1.Checking the connector locations of the Car Dock, plug the ClarionMiND into the connectors.
Note:
•Make sure the hooks of the Car Dock enter the slots on either side of the ClarionMiND.
Hook(s) come(s) off from the slot(s) 
on one or either side.
Hooks enter
the slots 
on either side.
•Charging starts when the ClarionMiND is attached to Car Dock.
•Do not use the car adapter that comes with the ClarionMiND for charging while the ClarionMiND is attached to the Car Dock.
ClarionMiND
Hook
Car Dock
Hook
Removing
1. Pull the release lever on the front of the Car | English |
| |
Dock to the right and hold it there as you |
|
remove the ClarionMiND. |
|
Note: |
|
•When attaching the ClarionMiND, make sure the Car Dock is pointed straight up and is not tilted. Trying to force attachment of the ClarionMiND while the Car Dock is at an angle can result in faulty connector contact.
•Do not leave the ClarionMiND on the Car Dock after pulling the release lever to the right. The hooks no longer will be engaged, which creates the risk of the ClarionMiND falling off of the Car Dock.
•Before attaching the ClarionMiND, make sure the release lever is returned to the left. It may not be returned to the left due to the operating condition.
| ClarionMiND |
Release lever | Car Dock |
|
Using the ClarionMiND while Attached to the Car Dock
This section explains what you can do with the ClarionMiND while it is attached to the Car Dock.
Car Mode
1.Connect the ClarionMiND to the Car Dock. Navigation will start up automatically and the Car mode Home screen will appear. For details about the Car mode and Navigation, see the ClarionMiND Owner's manual.
NK1U 9
