USING “PAUSE”
For best results, some recipes call for stirring, turning, or adding ingredients during cookrng Your microwave oven can be set to pause between COOK CYCLE 1 and 2 to give you ttme to stir or turn the food, or to add ingredients
DO THIS...
1. Put food in the oven and close the door.
2.Touch in desired cook- ing instructions for COOK CYCLE 1 (page 10).
Im
3. Touch PAUSE.
THIS HAPPENS...
The PAUSE Signal Light will come on and Iii the Display will show the Cook Power you
selected for COOK CYCLE 1 [if other than high), or the time selected for the COOK
EamCYCLE1
4.Touch in desired cook- ing instructions for COOK CYCLE 2 (page 10).
5.Touch START.
When COOK CYCLE 1 is over, you will hear one beep The oven will shut off
The PAUSE and COOK CYCLE 2 Signal Lights WIII come on. The Display will show the time set for COOK CYCLE 2.
| Open | the | door. Stir, turn or add ingredients. |
mq | Close | the | door. |
Touch START to continue with COOK CYCLE 2.
The oven will remain off until you touch
START.
ADDING “PAUSE”
The PAUSE can be added while the oven IS operating in COOK CYCLE 1, and if there is to be a COOK CYCLE 2
1 Touch PAUSE
2 Touch START
The mrcrowave oven wrtl stop automatically after COOK CYCLE 1 You will hex one beep COOK CYCLE 2 will not begrn until START is touched.
If COOK CYCLE 2 has already started, PAUSE cannot be added. Open the oven door to stop cooktng, stir or turn food; close the door and touch START
12