Changing the Cooking Time, Lower Cook Powers

count

down

The Display counts down the time to show how much cooking time is left in the first cycle.

When the cooking time ends you will hear 4 beeps. (You can stop the beeping by

opening the oven door ortouching CAN- CEL.) When the beeping stops, the Display will show the time of day.

CHANGING THE COOKING TIME

You can change the cooking time anytime during the cycle:

1.Touch COOK CYCLE 1.

2.Touch numbers for new time.

3.Touch START.

COOK CYCLE 1 will continue cooking for the new time.

LOWER COOK POWERS

For best results, some recipes call for lower Cook Powers. Lowering the Cook Power slows the cooking. The lower the Cook Power, the slower the cooking. Each Number

Pad on your microwave

oven

stands

for a

different

percentage

of Cook Power.

Many

recipes

in your MICRO

MENUS-

Cookbook

tell you, by number, which Cook Power to

use. Recipes

in other

books

and

magazines

may

tell you

by name (HI, MED, LO, etc.) or

by percentage

(1 O%, 50%,

80%,

etc.).

The

following

chart

gives

you

the percentage

of Cook

Power

each Number

Pad

stands

for, and

the Cook Power

name

usually

used

Tmk.

automatic 100% of full power HIGH

9 = 90% of full power

8 80% of full power

770% of full power MED-HI

6= 60% of full power

550% of full power MED

4 40% of full power

330% of full power MED-LO

2~ 20% of full power

1 em 10% of full power LO

0~ no power [fan and light will be off 1

DO THIS...

1. Put food in the oven and close the door.

3.Touch Number Pads for the cooking time you want.

THIS HAPPENS...

The COOK CYCLE 1 Signal Light will come on and the Display will show four 0’s.

The Display will show the numbers you touched in the order you touched them. This example shows 7 minutes, 30 seconds.

The COOK POWER Signal Light will come on and the Display will show two 0’s.

4. Touch COOK POWER.

CONTINUED NEXT PAGE