Whirlpool MW8650XL warranty Changing or Adding Instructions, Start

Extra Intormatlon:

l You can’t touch in more than 99 min- utes, 99 seconds of delay in COOK CYCLE 1.

l If you open the door before the oven begins to cook, be sure to retouch

START.

CAUTION:

Use foods that will not go bad or spoil

while waiting for cooking to start. Avoid using dishes with milk or eggs, cream

soups, cooked meats. poultry or fish, or

any item with baking powder or yeast. Smoked or frozen meats may be used;

so can vegetables, fruits and casserole- type foods.

Any food that has to wait for cooking to start should be very cold or frozen before it is put in the oven. MOST UNFROZEN FOODS SHOULD NEVER STAND MORE THAN TWO HOURS BEFORE COOK- ING STARTS.

CHANGING OR ADDING INSTRUCTIONS

Your mlcrowave oven 1sdeslgned to let you change your mind while you are touching In InstructIons. and to let you change InstructIons after you have started the oven.

l

l

l

l

You can change the Minute Tlmer at any time during its operation:

-Touch MINUTE TIMER.

-Touch in new time.

-Touch START. The new time will start counting down.

This is also true when using the Minute Timer during cooking or defrosting operations.

Cooklng	tlme	can	be changed		at	any	time	during	either	cooking	cycle:
- Touch	the	Cook	Cycle	you	wish	to	change	(COOK	CYCLE 1 or		2).

-Touch numbers for the new time.

-Touch START.

-The cycle will cook at the original Cook Power for the new time

Cook Power

can

be changed

at any

time during

either

cooking

cycle,

or COOK TEMP

-

Touch

the

Cook

Cycle

you

wish

to

change

(COOK

CYCLE 1 or 2).

-

Touch

COOK POWER

if you

want

to

change

to a Cook Power

other

than high.

-Touch a nuhber for the new Cook Power.

-Touch START. The cycle WIII cook at the new Cook Power for The original time. OR...

- Touch COOK POWER twice if you want to change a lower Cook Power to high.

-Touch START

COOK CYCLE 2 can be added at any time before COOK CYCLE 1 ends

-Touch COOK CYCLE 2

-	Touch	numbers	for desired	cooking	time.
-	Touch	COOK	POWER, If a	Cook Power	other than high IS desired.

-Touch a number for the Cook Power.

- Touch START. COOK CYCLE 2 will automaticaly follow COOK CYCLE 1.

. When using the Temperature Probe, COOK TEMP can be changed during operation

-Touch COOK TEMP

-Touch number for new temperature.

- Touch START. The oven will continue cooking to the new temperature If the new

temperature is lower than the temperature of the food, the oven WIII shut off

. COOK CYCLE 1 or 2 can be added anytime while QUICK DEFROST IS operating

-Touch COOK CYCLE 1 or 2

-Touch In time and Cook Power instructlons

-Touch START

Standing time occurs between QUICK DEFROST and COOK CYCLE 1, nol

between QUICK DEFROST and COOK CYCLE 2

18