Whirlpool MW 3 manual What to do if, Problem Possible cause Solution Appliance does not work

ENGLISH 14

What to do if ...

Problem	Possible cause	Solution
The appliance does not work.	The mains power supply	Check your fuses and ensure
	or the appliance is not	that there is power avaliable.
	connected.
	The door isn’t closed.	Open and then close the door
		before you try again.
A message is displayed such	The oven has	Disconnect and wait 10
as: F2, F3C, F7 or Err2, Err3,	recognized that a fault	minutes before reconnecting,
Err5.	has occured in one of it’s	then try to operate the oven
	sensors or similar.	once more. If the problem
		persists: call service.
The food is unevenly heated.	Very thin parts such as	Shield the thinner parts with
	chicken wingtips and	aluminum foil.
	such are not shielded.
	The food was heated at	Choose a lower power level.
	a power level too high.
	The turntable has	Check that the turntable and
	stopped.	turntable support is in place
		and the food is well centered,
		not touching the cavity walls.
Food isn’t turning.	The turntable has	Check that the turntable and
	stopped.	turntable support is in place
		and the cavity bottom is
		clean.

After-Sales Service

Before calling the After-Sales Service:

1.See if you can solve the problem on your own (see the “What to do if ...” table).

2.Switch the appliance off and on again to see if the problem has disappeared. If the fault persists after the above checks, contact IKEA After Sales Service. Always specify:

-- the type of fault;

-- exact type and model of appliance;

-- the After-Sales Service number (the number given after the word “Service” on the rating plate) located on the inside edge of the oven cavity (visible when the door is open);

-- your full address;

-- your telephone number.

If any repairs are required, please contact IKEA After Sales Service (to guarantee that original spare parts will be used and repairs carried out correctly).