Using your microwave oven
Microwave oven controls
There are three parts in the control section:
- Number Pads
When you first plug in the oven, a tone sounds and the Display will show 88:88. If after you set the Clock (page 6) the Display again shows all S’s, it means your electricity was off for a while. Reset the Clock.
Instructions for each control are covered on the following pages. Read them carefully.
Digital display/clock
Command pads
mmm
See page 6 for information on the tone you hear when touching any pad.
and indicator lights
When you are not using the micro- wave oven, this is an accurate digital clock. When you are using the micro- wave oven, it dis- plays time settings, indicator lights and shows what number pads you touched.
Touch Command Pads to tell the microwave oven what to do and in what order. A few examples:
-STARTtells the oven to start.
Each Command Pad (except START,CANCEL, and CLOCK SET) lights an Indicator Light when you touch the Command Pad.
While the oven is running, an Indicator Light (or lights) will be on to show what the oven is doing.
Number pads
mmm
Once you’ve touched a Corn mand Pad to tel; the oven what you want it to do, you’ll touch Number Pads to tell it...
-a food temperature.