Ricoh AP305 operating instructions Error & Status Messages, Printed Error Message

6. Troubleshooting

Error & Status Messages

There are three types of error messages:

•Printed error message

•Displayed error message

•Getting Printer Information over the Network

Printed Error Message

The error message shown below is output by the printer whenever there is not enough memory to print your data.

Error Message	Required Action
There is not enough memory in your	The following are the actions you should
printer to print this page. Change the res-	take when you encounter memory short-
olution to 300 dpi in the printer driver and	age problems. If these actions do not solve
try again. For details, please refer to the	the problem individually, try them in
troubleshooting section in your manual.	combination with each other. ⇒ P.114
	“Low Memory”
	A Increase printer memory.
	Install the optional memory unit to in-
	crease printer memory capacity. ⇒
	P.11 “Installing the Memory Unit
	(SIMM)”
	B Change the Color Level to [1 bit].
	Use the printer driver to select [Fast] or
	change the Color Level to [1 bit].
	⇒ The printer driver online help
	⇒ "RICOH-SCRIPT2 Operating In-
	structions”
	C Reduce resolution.
	Use the printer driver to set resolution
	to 300 dpi.
	⇒ The printer driver online help
	⇒ "RICOH-SCRIPT2 Operating In-
	structions”
	D Turn on "Image Memory".
	Use the printer's "System Menu" to
	turn on "Image Memory". ⇒ P.95
	“Making Printer Settings with the Opera-
	tion Panel”

55