| Other Printing Problems |
| ||
|
|
|
| |
Status | Possible Causes, Descriptions, and Solutions |
|
| |
|
|
|
| |
Paper misfeeds occur fre- | Check the paper size settings. The size specified with |
|
| |
quently. | the paper size dial might be different from the actual |
|
| |
| paper size. Make the correct dial setting. ⇒ P.49 “Load- |
|
| |
| ing Paper in the Paper Tray” |
|
| |
|
|
|
| |
| Check if the paper tray is set correctly. If not, set it cor- |
|
| |
| rectly. ⇒ P.49 “Loading Paper in the Paper Tray” |
|
| |
|
|
|
| |
| Paper is not loaded correctly in the paper tray. Remove |
|
| |
| the paper from the tray and reload it correctly. ⇒ P.49 |
|
| |
| “Loading Paper in the Paper Tray” |
|
| |
|
|
|
| |
| Check the paper type settings. The type of paper set |
|
| |
| with the printer driver might be different from the ac- |
|
| |
| tual paper or media type. Make the correct paper or |
|
| |
| media type setting. |
|
| |
|
|
|
| |
| You might use paper not supported by this printer. Use |
|
| |
| the appropriate type of paper. ⇒ P.45 “Precautions for |
|
| |
| Paper” |
|
| |
|
|
|
| |
Multiple pages are fed | Clean the friction pad, if it is dirty. ⇒ P.80 “Cleaning the |
|
| |
through the printer at once. | Friction Pad” |
|
| |
6 | ||||
|
|
| ||
Operation panel error mes- | After removing misfed paper, open the front cover of |
| ||
|
| |||
sage stays on after removing | your printer and then close it. ⇒ P.76 “Removing Misfed |
|
| |
the misfed paper. | Paper” |
|
| |
|
|
|
| |
It takes too much time to | The data is so large or complex that it takes time to pro- |
|
| |
print the first page. | cess it. If the Data In indicator is blinking, the data pro- |
|
| |
| cessing is being done. Just wait until it resumes. |
|
| |
|
|
|
| |
| The Energy Saver mode might be enabled. In the Ener- |
|
| |
| gy Saver mode, it takes time for the machine to warm |
|
| |
| up. |
|
| |
|
|
|
| |
It takes too much time to | Photographs and other data intensive pages take a |
|
| |
print. | long time for the printer to process, so simply wait |
|
| |
| when printing such data. |
|
| |
| You can also speed up printing by using the printer- |
|
| |
| driver to select [Fast] as the print mode, and by setting |
|
| |
| the resolution to 300 dpi. |
|
| |
|
|
|
| |
| The printer takes more time to print documents that |
|
| |
| contain a large volume of data. A blinking or lit Data |
|
| |
| In indicator means that data is reaching the printer, so |
|
| |
| just wait for the data to be processed and printed. |
|
| |
|
|
|
| |
| If "Warming Up" appears on the panel display, the |
|
| |
| printer is now warming up. Wait for a while. |
|
| |
|
|
|
| |
71
