Troubleshooting

B Remove the ozone filter from inside the ventilator hole cov- er.

TFWX070E

C Install a new ozone filter on the ventilator hole cover.

D Replace the ventilator hole cover onto the printer.

D Replace the ozone filters inside the printer. (There are two filters.)

6

A Open the front cover by push-

 

 

ing the front cover release but-

 

 

ton.

TFWX080E

B Grasping the ozone filter by its tab, remove it from the printer.

TFWX310E

C Insert a new ozone filter into the printer.

Slide the filter into the stopper. Two small thin plastic tabs of the top of the filter should pop into place.

TFWX320E

D Close the front cover.

Make sure that the front cover close properly.

E Turn on the printer’s power switch.

Note

After replace the fuser oil bottle, it takes a few minutes until the message clears.

Replacing the Waste Toner Bottle and Charger

You should replace waste toner bottle and charger whenever the following messages appear on the panel dis- play.

IPDL-C

Waste T Full

Waste Toner is

Full

92

Page 122
Image 122
Ricoh AP305 operating instructions Waste T Full Waste Toner is, Insert a new ozone filter into the printer