Troubleshooting
<Menu> | j |
List Print | l |
|
|
G You can find the crop marks on the long edge of the configuration page. Check if the left and right margins on the long edge of the configuration page as shown in the illustration.
H If the left and right margins are not the same use {U}{T} and to display "Maintenance", and then press {Enter}.
|
| <Menu> | j |
6 |
| Maintenance | l |
|
|
|
|
The following message appears on the panel display.
<Maintenance> j 1.Toner Selectl
<Tray2:W> jl/# -<-----g----->+
K Use {U}{T} to adjust the registra- tion.
To move the image to the left side, press {U} to move the g to the right. To move the image to the right side, press {T} to move the g to the left.
L After you are finished, press {En- ter}.
This registers your setting and re- turns to the “Registration”.
M Press {On Line}.
The normal display screen ap- pears.
I Use {U}{T} to display "4.Regis- tration", and then press {Enter}.
<Maintenance> j 4.Registrationl
The following message appears on the panel display.
<Registration> j
Tray2:W l
J Use {U}{T} to display the tray name, and then press {Enter}.
The following message appears on the panel display.
84
