Turning the Printer On and Off

Turning the Printer On and Off

Turning On the Printer

A Make sure that the power cord is securely plugged into the wall socket and the printer.

B Set the printer's power switch to the On position.

TFWX130E

After turning on the printer, it takes about seven minutes to warm up before being able to print. The following message ap- pears on the operation panel.

IPDL-C

Warming Up

When the printer is turned on, the Power indicator will blink repeat- edly. Once it stops blinking and re- mains on, you will be able to send data from the computer to the printer. When the following mes- sage appears on the operation pan- el, the printer will be able to begin printing.

IPDL-C

Ready

Turning Off the Printer

 

1

 

 

 

A Confirm that the Data In and the Error indicators are off.

Note

The Data In indicator blinks while receiving data from the computer and remains lit when printing. Do not turn off the printer while it is receiving data or printing.

When the Error indicator lights up, a printer error has occurred. Use the message that appears on the operation panel to trou- bleshoot the problem.

B Set the printer's power switch to the Off position.

TFWX110E

The Power indicator turns off.

Note

After printing, wait for about two minutes before turning off the printer. The printer uses this time to maintain itself. Turning off the printer immediately after printing may, over time, reduce the print quality.

7

Page 37
Image 37
Ricoh AP305 operating instructions Turning the Printer On and Off, Turning On the Printer, Warming Up, Ready