Avenview SW-HDSDI-8X1 specifications Installation

7.	Power Switch	8.	5V DC Power Jack
9.	SYNC Signal Input	10.	SDI Output
11.	SYNC Signal Loop Out	12.	SDI Input

1.8Installation

To setup Avenview SW-HDSDI-8X1 follow these steps for connecting to a device:

1.Connect SDI enable equipments to the output of SW-HDSDI-8X1

2.Connect the SDI input sources to the inputs of SW-HDSDI-8X1

3.Plug power adapter cable into 5V DC power jack of SW-HDSDI-8X1

4.Use IR Remote, RS232 or front panel push button to switch between inputs.

www.avenview.com 6