TRENDnet TW100-BRM504 manual Installation, Requirements, Procedure, Chapter

Models: TW100-BRM504

1 73
Download 73 pages 24.74 Kb
Page 9
Image 9
Installation

Chapter 2

2

 

Installation

 

This Chapter covers the physical installation of the TW100-BRM504.

Requirements

Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.

TCP/IP protocol must be installed on all PCs.

For Internet Access, an Internet Access account with an ISP, and a DSL connection.

Procedure

Figure 4: Installation Diagram

1. Choose an Installation Site

Select a suitable place on the network to install the TW100-BRM504.

2. Connect LAN Cables

Use standard LAN cables to connect PCs to the Switching Hub ports on the TW100- BRM504. Both 10BaseT and 100BaseT connections can be used simultaneously.

If required, connect any port to a normal port on another Hub, using a standard LAN cable. Any LAN port on the TW100-BRM504 will automatically function as an "Uplink" port when required.

3. Connect ADSL Cable

Connect the supplied ADSL cable from to the WAN port on the TW100-BRM504 (the RJ11 connector) to the ADSL terminator provided by your phone company.

6

Page 9
Image 9
TRENDnet TW100-BRM504 manual Installation, Requirements, Procedure, Chapter