TRENDnet TW100-BRM504 manual Setup Wizard, Common Connection Types, Details, ISP Data required

Models: TW100-BRM504

1 73
Download 73 pages 24.74 Kb
Page 13
Image 13
Setup Wizard

Broadband ADSL Router User Guide

If you can't connect

If the TW100-BRM504 does not respond, check the following:

The TW100-BRM504 is properly installed, LAN connection is OK, and it is powered ON. You can test the connection by using the "Ping" command:

Open the MS-DOS window or command prompt window.

Enter the command:

ping 192.168.0.1

If no response is received, either the connection is not working, or your PC's IP address is not compatible with the TW100-BRM504's IP Address. (See next item.)

If your PC is using a fixed IP Address, its IP Address must be within the range 192.168.0.2 to 192.168.0.254 to be compatible with the TW100-BRM504's de- fault IP Address of 192.168.0.1. Also, the Network Mask must be set to 255.255.255.0. See Chapter 4 - PC Configuration for details on checking your PC's TCP/IP settings.

Ensure that your PC and the TW100-BRM504 are on the same network seg- ment. (If you don't have a router, this must be the case.)

Setup Wizard

The first time you connect to the TW100-BRM504, the Setup Wizard will run automatically. (The Setup Wizard will also run if the TW100-BRM504's default settings are restored.)

1.Step through the Wizard until finished.

You need the data supplied by your ISP. Most connection methods require some data input.

The common connection types are explained in the table below.

2.On the final screen of the Wizard, run the test and check that an Internet connection can be established.

3.If the connection test fails:

Check all connections, and the front panel LEDs.

Check that you have entered all data correctly.

Common Connection Types

Type

Details

ISP Data required

Dynamic

Your IP Address is allocated

a) ADSL parameters (VPI and

IP Address

automatically, when you connect

VCI) may be required, if they

 

to you ISP.

cannot be detected automatically.

 

 

b) Some ISP's may require you to

 

 

use a particular Hostname or

 

 

Domain name, or MAC (physical)

 

 

address.

 

 

 

10

Page 13
Image 13
TRENDnet TW100-BRM504 manual Setup Wizard, Common Connection Types, Details, ISP Data required