TRENDnet TW100-BRM504 manual Power Up, Check the LEDs

Installation

4. Power Up

Connect the supplied power adapter to the TW100-BRM504 and power up.

Use only the power adapter provided. Using a different one may cause hardware damage

5. Check the LEDs

•The Power LED should be ON.

•The Status LED should flash, then turn Off. If it stays on or blinking after 60 seconds, there is a hardware error.

•, there is a hardware error.

•For each LAN (PC) connection, one of the LAN LEDs should be ON (provided the PC is also ON.)

•The WLAN LED should be ON

•The WAN LED should be ON if the ADSL line is connected.

.

For more information, refer to Front-mounted LEDs in Chapter 1.

7