TRENDnet TW100-BRM504 manual Rear Panel, Power port, 10/100BaseT, LAN connections, Reset Button

Introduction

Rear Panel

	Figure 3: Rear Panel
Power port	Connect the supplied power adapter here.
10/100BaseT	Use standard LAN cables (RJ45 connectors) to connect your PCs to
LAN connections	these ports.
	Note:
	Any LAN port on the TW100-BRM504 will automatically function
	as an "Uplink" port when required. Just connect any port to a normal
	port on the other hub, using a standard LAN cable.
Reset Button	This button will reset the TW100-BRM504 to the factory default
(Reset to Defaults)	values.
	To do this, press and hold the Reset Button for five (5) seconds, until
	the Status LED is lit, then release the Reset Button, and wait the
	TW100-BRM504 to restart using the factory default values.
WAN port	Connect this port to your ADSL line.
(ADSL port)

5