Installing the Paper Feed Unit Type305
Installing the Paper Feed Unit Type305
RCAUTION:
•It is recommended that at least two persons are used to lift the machine. Otherwise, the ma- chine might fall and cause per- sonal injury.
•When lifting the machine, use the inset grips on both sides of the machine. Otherwise, the ma- chine might fall and cause per- sonal injury.
•
•When moving the printer, be sure to keep it level to avoid spill- ing the fuser oil. If oil is spilt, wipe it with alkaline cleaner. Other- wise, the oily surfaces can cre- ate the danger of slipping and personal injury.
Important
❒If your printer is equipped with the optional tray, do not pull out more than one tray with paper at a time. If you do, the printer might tilt forward.
Note
❒It is impossible to install more than two paper feed units to your print- er at a time.
A Check the contents of the box for the following items.
•Paper feed unit
•Installation Guide
C Move the printer to make install- ing space.
2
TFWH100E
Important
❒Be careful to lift the printer as the right front side of the printer is significantly heavier than the left front side.
D Remove the paper feed unit from the box, and remove the styro- foam packing and the bag from the side covers.
TFWP050E
B Turn off the printer's power switch and remove all cables and cords from the printer.
19
