Loading Paper
Specifying paper size using the operation panel
Use the following procedure to speci- fy the paper size from the printer's operation panel after loading paper into the bypass tray.
A Press {Media}. |
|
|
|
| On Line | Reset | Escape |
| Menu | Media | Enter |
Power | Error |
| Data In |
|
|
| TFWS040E |
The following message appears on the panel display.
<Media> j 1.Paper Tray l
B After confirming that “1.Paper Tray” is on the display, press {En- ter}.
<Paper Tray> j
*Tray1/A4 l
C Use {U}{T} to display “Byps.”, and then press {Enter}.
Note
❒If there is no paper in the bypass tray, the Error indicator stays on.
D Use {U}{T} to display “2. Paper Size”, and then press {Enter}.
The current paper size appears on the panel display.
E Select the paper size you have specified for the paper tray.
Standard Paper Size
A Use {U}{T} to display the pa- per size that is in the tray, and then press {Enter}.
The following message appears on the panel display.
<Media> j 2.Paper Size l
Custom Size Paper
A Use {U}{T} to display “Cus- |
| ||
5 | |||
tom”, and then press {Enter}. |
| ||
The following message appears |
| ||
on the panel display. |
| ||
|
|
|
|
<Custom> | l |
|
|
jl/# Width 297mm |
|
| |
|
|
|
|
B Use {U}{T} to change the third (leftmost) digit of the paper width, and then press {Enter}.
The pointer (l) moves to the right.
<Custom> l
jl/# Width 197mm
Note
❒Press {Escape} to move the pointer to the left.
❒Press {Escape} while the pointer is located at the left- most digit of the width to cancel the settings and return to step D.
<Paper Size> j
A3l
53
