Troubleshooting
Process Group Error Codes
|
| Process Group Error Codes |
|
|
| wq_get_proc_cls() |
|
| Error Code | WQERR_NOTREADY |
|
| Description | PRM is not installed or not configured on the system. |
|
| Action | Install and configure PRM on the system. |
|
|
|
|
|
| Error Code | WQERR_OTHER |
|
| Description | If error logging to syslog is enabled (“error” level for all facilities), the error is logged to |
|
|
| the /var/adm/syslog/syslog.log log file. |
|
| Action | Check the /var/adm/syslog/syslog.log log file for more information. If error |
|
|
| logging is not enabled, enable it and try running your application again to generate error |
|
|
| messages. |
|
|
|
|
|
|
| wq_set_proc_cls() |
|
| Error Code | WQERR_BADSCOPE |
|
| Description | The value provided for scope is not defined. WQ_SCOPE_PROCESS is the only defined |
|
|
| value that can be used. |
|
| Action | scope can only be set to WQ_SCOPE_PROCESS. |
|
|
|
|
|
| Error Code | WQERR_BADSVCCLASS |
|
| Description | The value provided for class is not a defined process group. |
|
| Action | Use one of the |
|
|
| /usr/include/webqosapi.h. Currently, WebQoS does not support the customization |
|
|
| of process group definitions. |
|
|
|
|
|
Chapter 3 | 29 |
