HP WebQoS Software manual Process Group Error Codes

		Troubleshooting
		Process Group Error Codes
Error Code	WQERR_CONNECT
Description	Problems connecting to the SCA process. If error logging to syslog is enabled, the errors
	are logged to the /var/adm/syslog/syslog.log log file.
Action	Check the /var/adm/syslog/syslog.log log file for more information. If error
	logging is not enabled, enable it and try running your application again to generate error
	messages.
	Possible errors in syslog.log include:
	• cannot find entry “hp-sca” in /etc/services.
	Action: Add the entry hp-sca 19411/tcp to the /etc/services file.
	• connect to SCA fails. The sca process is not running or is not responding.
	Action: Run the following commands:
	—	/opt/webqos/vin/sca_stop
	—	/opt/webqos/vin/sca_start
	• Other
	Action: Contact your HP Support Representative.
Error Code	WQERR_NOTROOT
Description	The process attempted to set the process group to a value that can only be accessed by
	root.
Action	Set the process group to another value; or make sure the process setting the process group
	is a root process.
Error Code	WQERR_NOTREADY
Description	PRM is not installed or not configured on the system.
Action	Run the following command:
	prmconfig -ie -f /etc/opt/webqos/QP_prmconf

30 Chapter 3