Front Control Panel
The shaded buttons on the front control panel are duplicated on the remote control. The top row of labels shows the control functions when there are no TV menus displayed on the screen. The bottom row of labels shows the control functions when the TV menus are displayed on the screen or when a special function has been activated. See “Remote Control Overview” for further details on the functions of these buttons.
SYSTEM | LAMP STATUS TIMER |
RESET |
|
|
|
|
| System Reset |
|
|
|
|
| |
|
|
|
|
| If the TV does not respond to either the remote control or the front panel controls and/or |
| SYSTEM |
|
|
| does not power Off, press the SYSTEM RESET button with a pointed item like the end |
| LA |
| point of a paperclip. The TV will turn Off and the TIMER light will flash quickly for about | ||
| RESET |
| |||
|
|
|
|
| one minute. When the TIMER light stops flashing, you may again turn on the TV. The |
|
|
|
|
| changes you made the last time the TV was on before you used the SYSTEM RESET |
|
|
|
|
| |
|
|
|
|
| button may be lost; any changes that were previously saved are not lost, however. |
|
|
|
|
| |
|
|
|
|
|
|
A/V Reset
There may be times when you wish to reset the A/V (Audio and Video) settings back to the factory defaults. To return all of the settings at once, press GUIDE and FORMAT on the front panel at the same time. To reset the defaults for individual devices, use the A/V Memory Reset selection on the Audio/Video menu.
Front-Panel Indicator Lights
SYSTEM | LAMP STATUS TIMER |
RESET |
Power/Timer Indicator
Indicator Color | TV Condition | Additional Information | |
None (indicator | TV is powered OFF. | Normal operation. | |
off) |
|
|
|
|
|
| |
Green, steady | TV is powered ON. | Normal operation. | |
|
|
|
|
Green, rapid | 1. | TV just plugged into AC outlet. | Wait until blinking stops before turning on |
blinking |
|
| (approximately 1 minute). Normal operation. |
|
|
|
|
| 2. | AC just restored after power failure. | Wait until blinking stops before turning on |
|
|
| (approximately 1 minute). Normal operation. |
|
|
|
|
| 3. | TV Rebooting after System Reset | Wait until blinking stops before turning on |
|
| used. | (approximately |
|
|
|
|
| 4. | TV Rebooting after power | Wait until blinking stops before turning on |
|
| fluctuation or receiving abnormal | (approximately 1 minute). Normal operation. |
|
| digital signals from digital channel, |
|
|
| CableCARD™, or digital device. |
|
| 5. | You have begun the procedure to | For detailed information, see the instructions |
|
| update software from an authorized | that accompany the authorized software update. |
|
| flash memory device. | Important: Do not use |
|
|
| any time. |
|
|
| |
Green, slow | TV powered off and | Normal operation. TV can be turned on at any | |
blinking | timer is set. | time. | |
|
|
|
|
12 | Chapter 1. Television Overview |
