PC Viewing
Figure 1
To display your PC screen on the TV, first connect the PC to the HDMI 2 input on the TV’s back panel (see Chapter 2). You must then activate the PC option in NetCommand. You can do this during initial NetCommand setup (in the Device Setup screen), or at any time afterwards by using the NetCommand Add function. You will then be able to select the PC through the Device Selection Menu. For the correct screen resolution (pixels), use the PC’s Control Panel settings.
Your Mitsubishi TV can display resolutions from standard VGA (640 x 480) through XGA
1.In the PC’s “Start” menu, select “Settings.”
2.Select “Control Panel.”
3.Select “Display.”
4.Choose the “Settings” tab.
5.Depending on your PC, either:
Use the Screen area slider or use the Screen Resolution slider to adjust the resolution.
You may need to restart the PC for this change to take effect.
Hint: You may want to set the computer’s screen saver to a pattern, to display after several minutes, as a reminder that the TV is still powered on and time is being added to the lamp’s elapsed hours. Even if the screen appears dark, if the TV’s power is on, the lamp is in use.
1.
4.
5.
2.3.
Figure 1. PC resolution XGA selection
Chapter 6. Additional Features | 85 |
