UsingAUTOSET

Using Your Microwave Oven Continued

6.Touch START. The COOK 1 and COOK POWER Indicator Lights will stay on to show that the oven is cooking in the first cycle at a Cook Power other than HIGH.

The Display counts down the time to show how much cooking time is left in the first cycle.

For 2 of every 10 seconds, the Display will show the Cook Power you selected.

When the cooking time ends, “End”will show on the Display and 4 beeps will sound. (You can stop the beeping by opening the door or by touching CANCEL.) “End”will remain on the Display and a reminder tone will sound every 30 seconds (to remind you that food is left in the oven) until the door is opened or CANCEL is touched. The Display will then show the time of day.

Changing the cook power

The Cook Power can be changed any time before or after touching START:

1.Touch COOK POWER.

2.Touch a Number Pad for the new Cook Power.

3.Touch START. The cycle will cook at the new Cook Power for the original time.

OR..

1.Touch COOK POWER twice if you want to change a lower Cook Power to HIGH.

2.Touch START.

Auto Set provides ten preset times. One to nine minutes at HIGH Cook Power can be selected by touching AUTO SET and the corresponding Number Pad (l-9). You don’t need to touch any additional Number Pads as you do when using COOK 1 or COOK 2. This provides a short-cut method for setting commonly used cooking times.

The AUTO SET chart included with your microwave oven and the AUTO SET guide on the inner door panel helps you cook various food items without having to look up the cooking times.

A preset time of 2 minutes, 30 seconds at HIGH Cook Power is available by touching just the AUTO SET pad. The time may be changed to any time from O-99 minutes, O-99 seconds, allowing you to store your favorite cooking time and Cook Power, or to preprogram the oven for someone else to cook an already prepared dish at a later time. See page 16 for instructions.