PAUSE OR STOP COOKING
To pause cooking:
The cooking can be paused to check, turn or stir the food by opening the door. The setting will be maintained for 10 minutes.
To continue cooking:
Close the door and press the Start button ONCE. The cooking is resumed from where it was paused.
Pressing the Start button TWICE will increase the time by 30 seconds.
If you don’t want to continue cooking:
Remove the food, close the door and press the STOP button
A beep will signal once a minute 
for 10 minutes when the cooking is finished. Press the STOP button or open the door to cancel the signal.
Note: The oven will only hold the settings for 60 seconds if the door is opened and then closed after the cooking is finished.
CLOCK
F
24 6 | 5 |
1(a) | 3 |
1(a). Turn the multifunction knob to the zero position.
2(b). Press the Select button (3 seconds) until the
3.Turn the +/- knob to set the hours.
4.Press the Select button again. (The two right hand digits (minutes) flicker).
5.Turn the +/- knob to set the minutes.
6.Press the Select button again.
The Clock is set and in operation.
Keep the door open while setting the Clock. This gives you 10 minutes to complete the setting of the Clock. Otherwise, each step must be accomplished within 60 seconds.
Note: When the appliance is first plugged in or after a power failure, the display is blank. If the clock is not set, the display will remain blank until the cooking time is set.
If you wish to remove the clock from the display once it has been set,
follow steps (a) & (b) and press the Stop button
(c).
To reinstate the clock, follow the above procedure.
7